top sales 16x5x101/2 press-on solid tires, solid forklift tire 21x7x15
USD $20 - $200 /Piece
Min.Order:10 Pieces
Yantai Wonray Rubber Tire Co., Ltd.
top sales 16x5x101/2 press-on solid tires, solid forklift tire 21x7x15
characteristic:
Press-on tires are applicable for industrial vehicles running on the smooth road, it has characteristics as follows:
1. Lower barycenter
2. Lower energy consumption
3. Anti-puncture
4. Higher density of rubber
5. Lower maintenance cost
6. Higher wear resistance
7. Good stability
8. Tire base is made to combine with steel wheel very tightly so as to avoild peeling off between them.
Advantages:
Flat-Proof Tires.
High-Load Capacity.
Longer Life
Heavy Duty Rubber Compounds
Air-Cushioned Ride
Special Sidewall Design.
More Natural Rubber.
Company introduction:
Yantai Wonray Rubber Tire Co., Ltd. is a comprehensive enterprise engaged in researching, producing and selling industrial tires with high performance at low costs. Our annual production capacity is 300,000 pieces, among which 40% products are exported to oversea markets like North America, Europe, Southeast Asia, Oceania, Africa, etc. Our sales network spreads all over China, and we can provide excellent and complete after-sales services for all customers.
All our products meet the standards TRA in the USA, ETRTO in Europe and JATMA in Japan.
specification:
Size of Tire | Type of pattern | Weight | Load Capacity(kg) | Counter Balanced Lift Trucks | Other Industrial Vechicles | ||||
Inch | Millimeter | ±1.5% | 10km/h | 16km/h | 16km/h | ||||
(in) | (mm) | Driving | Steering | Driving | Steering | ||||
1 | 9×5×5 | 228.6×127×127 | SM | 6.5 | 890 | 790 | 850 | 785 | 680 |
2 | 10×4×6 1/2 | 254×101.6×165.1 | SM | 6 | 720 | 640 | 690 | 635 | 555 |
3 | 10×5×6 1/2 | 254×127×165.1 | SM | 7.4 | 940 | 840 | 900 | 830 | 725 |
4 | 10×6×6 1/2 | 254×152.4×165.1 | SM | 9 | 1160 | 1030 | 1110 | 1030 | 895 |
5 | 101/2×5×5 | 266.7×127×127 | SM | 8 | 1020 | 905 | 980 | 905 | 785 |
6 | 101/2×6×5 | 266.7×152.4×127 | SM | 10.4 | 1295 | 1150 | 1240 | 1145 | 1000 |
7 | 101/2×5×61/2 | 266.7×127×165.1 | SM | 8.2 | 1000 | 890 | 950 | 880 | 770 |
8 | 101/2×6×61/2 | 266.7×152.4×165.1 | SM | 9.6 | 1240 | 1100 | 1185 | 1090 | 950 |
9 | 12×41/2×8 | 304.8×114.3×203.2 | SM | 8.6 | 950 | 840 | 900 | 830 | 730 |
After Sales:
1, All our solid tires are in line with GB/T10824-2008
2, If needed, we can supply the correct rims and press the rims into the tires
3, We will advise the speed limit and load capacity after sales
4, If any problem, please contact with us, we will reply in short time.
5, If quality problem, please take photos, we will be responsible for this.
6, For the need of developing new product, please offer us detailed technical requirement or mould drawing.
For additional information please call us or leave message:
Ms Kelly Ma 24 hours service phone 86 13884937497