Specifications

304 Stainless Steel Strip/Tape /Band /Narrow Coil:
1Prime quality
2.Competitive price
3.Adequate stock
4.Good reputation

Aisi 304 Stainless Steel Strip/Tape /Band /Narrow Coil

 

 

 

 Specification of Stainless Steel Strip:

1. Standard: ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165
2. Grade: 200series&300series&400series
3. Thickness: 0.05mm - 3.0mm
4. Width: 3.2mm-550mm
5. Length: as customers' request
6. Surface finish: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K
7. Manufacture technology: cold drawn/cold rolled/hot rolled
8. Hardness: 1/4H, 1/2H, 3/4H, H, FH,TH

Features of Stainless Steel Strip:

1.High tensile strength
2.Anti-corrosive
3.Durable
4.Low maintenance

Parameter of Stainless Steel Strip:

Grade Datasheet of Stainless Steel Strip:

Stainless Steel Strip Production:

Hot rolled stainless steel strip is a semifinished product obtained from the hot rolling of slabs or billets and is produced for conversion by cold rolling.

Cold rolled stainless steel strip is manufactured from hot rolled, annealed and pickled strip by cold rolling on polished rolls. Depending on the thickness desired, the cold rolling requires various numbers of passes through the mill to effect the necessary reduction and to secure the desired surface characteristics and mechanical properties. 

 

Q: What is stainless steel used for?

A. There are more than 57 types of stainless steels that are used in an extensive number of applications and industries.Stainless steel is an iron alloy that is used in a wide range of everyday applications because of its exceptional resistance to stain and rust. 

Domestic – cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades
Architectural/Civil Engineering – cladding, handrails, door and window fittings, street furniture, structural sections, reinforcement bar, lighting columns, lintels, masonry supports

Transport – exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers
Chemical/Pharmaceutical – pressure vessels, process piping.
Oil and Gas – platform accommodation, cable trays, subsea pipelines.
Food and Drink – Catering equipment, brewing, distilling, food processing.
Water – Water and sewage treatment, water tubing, hot water tanks.
General – springs, fasteners (bolts, nuts and washers), wire.

Q: Why is stainless steel magnetic?

A: Stainless steel sheet itself is not magnetic, but stretching into a basin in the process of sheet metal crystal structure by high-pressure extrusion deformation, will produce a small amount of martensite structures that there was a slight magnetic and tensile deformation Large areas will be greater magnetic. Therefore, the basin will be part of the tensile body with little magnetic, especially the four largest fillet tensile deformation, also slightly magnetic. The panel is not the tensile deformation, almost non-magnetic. Some of the products currently on the market is not magnetic because the magnetic treatment after delinking.

 

Q:What surface finishes are available on stainless steels?

A: There are many different types of surface finish on stainless steel. Some of these originate from the mill but many are applied later during processing, for example polished, brushed, blasted, etched and coloured finishes.
The importance of surface finish in determining the corrosion resistance of the stainless steel surface cannot be overemphasised. A rough surface finish can effectively lower the corrosion resistance to that of a lower grade of stainless steel.