Product Details

diesel generator automatic control module 702

The model 702MS is an Engine control module designed to control the engine via a key switch and pushbuttons on the front panel.The module is used to start and stop the engine and indicate fault conditions,automatically shutting down the engine and indicating the cause of failure by LED,giving true,first up fault annunciation.

Additionally,the Autostart versions of the controller will respond to a remote switched input to begin the start sequence.

Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.

Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive voltage dips during cranking. Without The need for internal batteries.
Alternator Input Range	15 - 305 V AC RMS (+20%)
Alternator Input Frequency:	50 - 60 Hz at rated engine speed. (Minimum 75V AC) Overspeed: nominal frequency +14% (+24% Overshoot)
Start Output:	Solid State 1.2A negative grounding terminal
Run Output:	Solid State 1.2A negative grounding terminal
Pre-heat Output:	Solid State1.2A negative grounding terminal
Operating Temperature Range:	-30 to +70°C

Name	Model No
Generator controller	GC30D
Generator controller	BC118
Generator controller	BC168
Generator controller	BC180
Generator controller	DC20D
Generator controller	DC40D
Generator controller	BC501K
Generator controller	BC520A
Generator controller	BC3000
Generator controller	BC5110
Generator controller	BC5110-
Generator controller	BC5120
Generator controller	BC5210
Generator controller	BC5220
Generator controller	BC701MS
Generator controller	BC701K-AS
Generator controller	BC702MS-HC
Generator controller	BC702AS-HC
Generator controller	BC703
Generator controller	BC704
Generator controller	BC705
Generator controller	BC710
Generator controller	BC720
USB	P810
Step Speed controller	ESM3012
Actuator	ASM5676
Actuator	ASM5654
Engine Control Box	BX341
Engine Control Box	BX40
Generator set Control Box	BX5XXX ORIGINAL VERSION
Engine interface card	EIM630-465/466