Bulldozer
Negotiable
Min.Order:1
Tianjin City P.R.E. Imp & Exp Trade Co., Ltd.
Low price, high specific power, productivity and reliability | |||
·Easy transportation with small overall size and light weight | |||
·Maneuverable operation, open view, and excellent comfort | |||
·Strong adaptability and easy maintenance and service | |||
Introduction | |||
·The single manufacturer in China which produces with the technologies introduced from Komatsu Japan | |||
·Total Komatsu level with strict production as per the drawings, technique documents, and quality standard (Komatsu KES) of D60A-8 provided by Komatsu Ltd. | |||
·Can be equipped with Cummins NT855, Steyr WD615T1-3A, and Shanghai Dongfeng G6135G2 engines | |||
Advantages | |||
D60A-8 of Komatsu Ltd, its prototype machine, is a representative of the advanced models in international bulldozer industry. Compared with other introduced medium horsepower bulldozers like D6D and D80A-12, there are certain breakthroughs on it in terms of structure and performance | |||
Main specifications of T160C bulldozer | |||
Engine | Model WD615T1-3A | NT855-C280 | |
Type | 6-cylinder, single line, vertical, water-cooled, 4-stroke, supercharged, direction injection | ||
Cylinder numbercylinder diameter×stroke(mm) | 6-140×152 | ||
Rated output(Kw) | 118 | ||
Rated engine speed (r/min) | 1850 | ||
Max. torque (Nm) /Engine speed (r/min) | 830/1250 | ||
Fuel rate (g/KWh) | ≤212 | ||
Startup mode | 24V 7.5KWElectric startup | ||
Machine specifications | Shovel | Angle | Straight |
Operating mass (kg) | 16333 | 16713 | |
Min. turning radius (m) | 3.1 | ||
Grade ability (°) | 30 | ||
Max. traction force (KN) | 133.77 | ||
Speed (km/h) | I gear II gear III gear IV gear V gear | ||
Forward | 2.7 3.7 5.4 7.6 11.0 | ||
Reverse | 3.5 4.9 7.0 9.8 | ||
Track center distance (mm) | 1880 | ||
Track contact lengthmm | 2430 | ||
Track shoe width (mm) | 510 | ||
Ground pressure (Kpa) | 64 | 66 | |
Min. ground clearance (mm) | 400 | ||
Overall dimensions: L×W×H (mm) | 5135×3970×2957 | 5025×3416×2957 | |
Blade dimensions: W×H (mm) | 3970×1040 | 3416×1150 | |
Blade cutting angel (°) | 55 | 55 | |
Blade horizontal turning angle (°) | 25 | - | |
Max. blade straight tiltmm | 400 | 860 | |
Max. blade lifting height (mm) | 1110 | 1095 | |
Max. blade cutting depth (mm) | 530 | 545 | |
Blade capacity (m³) | 3.69 | 3.58 | |
Work efficiency of 40m haul distance (m³/h) | 239 | 231.9 | |
Drive system | Master clutch, Hydraulic torque converter | Master clutch: wet, multi-disc, inertia brake, manual operation, hydraulic assistance | |
Transmission | Helical gear constant mesh, forced lubrication, manual operation, five forward gears, four reverse gears | ||
Center drive | Helical bevel gear, splash lubrication | ||
Steering clutch | wet, multi-disc, disc spring pressurized, manual operation (linked to the brake), hydraulic assistance | ||
Steering brake | wet, belt wrapped, foot operated with hydraulic assistance and parking braking device | ||
Final drive | Spur gear, two-stage reduction, splash lubrication | ||
Travel system | Suspension mode | Semi-rigid, compensating beam | |
Carrier rollers (single side) | two | ||
Track rollers (single side: single flange / double flange) | sixfour/two | ||
Track shoes (single side) | 37 pieces | ||
Hydraulic system | Oil pump model | CBJ7-E112FK gear pump | |
Operating valve | Single post valve Dual post valve | ||
System pressure (Mpa) | 13.7 | ||
System flow (L/min) | 250 | ||
Attachments | Winch | Mechanical traction double winches | |
Ripper | Hydraulic operated, four bar linkage, three teeth |