CFT6 CAM FOLLOWERS WITH TAP HOLES FOR PIPING CFT TYPE
USD $3.6 - $3.6 /Set
Min.Order:100 Sets
Jinan Kelunte Bearing Co., Ltd.
CFT6 CAM FOLLOWERS WITH TAP HOLES FOR PIPING CFT TYPE
Designation: CFT 6 V | ||||||||||||||||
Type: Radial Cylindrical Roller Bearings. Needle roller brgs, incl matched sets and CRB track rollers. Complete. (6X16X11). | ||||||||||||||||
Main dimensions: | ||||||||||||||||
|
Basically the same as the popular type Cam Follower, this model is provided with tapped holes for piping on the stud head and the thread. It is optimal for locations where an integrated piping system for greasing is required.
Stud diameter | Dimensions(mm) | |||||||||
mm | D | C | d | |||||||
6 | 16 | 11 | 6 | |||||||
Dimensions(mm) | ||||||||||
Thread | ||||||||||
G | G1 | B1 | B2 | B3 | C1 | S1 | d2 | 1) γs min | f | |
M6X1 | 8 | 28 | 16 | - | 0.6 | 3) M6X0.75 | - | 0.3 | 11 | |
Max tightening torque N·m | Basic dynamic load rating Cr N | Basic static load rating Cor N | Largest pemis- sible load N | Track load capacity N | Limiting speed 2) rpm | Designation | Weight g | |||
Cylindrical outer ring | Crowned outer ring | |||||||||
Without seals | With seals | Without seals | With seals | |||||||
3 | 3 630 | 3 630 | 2 110 | 3 430 | 25 000 | CFT 6 | 18.5 |
CFT6 CAM FOLLOWERS WITH TAP HOLES FOR PIPING CFT TYPE
odel No. | Main dimensions | Basic load rating | |||||||
Outer diameter | Threaded | Outer ring width | B | Overall length | With cage | Full-roller type | |||
D | G | C | B1 | Dynamic rating | Static rating | Dynamic rating | Static rating | ||
C | C0 | C | C0 | ||||||
mm | mm | mm | mm | mm | kN | kN | kN | kN | |
CFT 6 | 16 | M6×1 | 11 | 12 | 28 | 3.59 | 3.58 | 6.94 | 8.5 |
CFT 8 | 19 | M8×1.25 | 11 | 12 | 32 | 4.17 | 4.65 | 8.13 | 11.2 |
CFT 10 | 22 | M10×1.25 | 12 | 13 | 36 | 5.33 | 6.78 | 9.42 | 14.3 |
CFT 10-1 | 26 | M10×1.25 | 12 | 13 | 36 | 5.33 | 6.78 | 9.42 | 14.3 |
CFT 12 | 30 | M12×1.5 | 14 | 15 | 40 | 7.87 | 9.79 | 13.4 | 19.8 |
CFT 12-1 | 32 | M12×1.5 | 14 | 15 | 40 | 7.87 | 9.79 | 13.4 | 19.8 |
CFT 16 | 35 | M16×1.5 | 18 | 19.5 | 52 | 12 | 18.3 | 20.6 | 37.6 |
CFT 18 | 40 | M18×1.5 | 20 | 21.5 | 58 | 14.7 | 25.2 | 25.2 | 51.3 |
CFT 20 | 52 | M20×1.5 | 24 | 25.5 | 66 | 20.7 | 34.8 | 33.2 | 64.8 |
CFT 20-1 | 47 | M20×1.5 | 24 | 25.5 | 66 | 20.7 | 34.8 | 33.2 | 64.8 |
CFT 24 | 62 | M24×1.5 | 29 | 30.5 | 80 | 30.6 | 53.2 | 46.7 | 92.9 |
CFT 24-1 | 72 | M24×1.5 | 29 | 30.5 | 80 | 30.6 | 53.2 | 46.7 | 92.9 |
CFT 30 | 80 | M30×1.5 | 35 | 37 | 100 | 45.4 | 87.6 | 67.6 | 145 |
CFT 30-1 | 85 | M30×1.5 | 35 | 37 | 100 | 45.4 | 87.6 | 67.6 | 145 |
CFT 30-2 | 90 | M30×1.5 | 35 | 37 | 100 | 45.4 | 87.6 | 67.6 | 145 |