Specifications

self-aligning ball bearing 1316 build a bear
1.Wide range of use
2.Large in stock
3.Prompt delivery
4.Free sample

 self-aligning ball bearing 1316 build a bear

 

 Features: 
With two structures of bore cylindrical or tapered and retainers made of steel sheet or synthetic 

resins, the bearings are characteristic of their spherically formed outer ring raceways allowing for 

misalignment within 3 degree deflection between inner ring and outer ring, so as to compensate 

concentricity and deflection errors. 

 

Description:

 

1. The components of the self aligning ball bearings include two rows of balls, the cage, the inner ring, and the outer ring with a common concave sphered raceway.

 

2. This type bearings are self-aligning and insensitive to angular misalignments of the shaft relative to the housing.

 

3. The bearings are produced in several design: open bearings with the basic design, sealed bearings, open bearings with an extended inner ring.

 

4. The self alignning ball bearings have the lowest friction of all rolling bearings.

 

5. The bearings are available with a cylindrical bore or, in certain size ranges, with a tapered bore

 

clearance:
The cylindrical bore of the basic types of self-aligning ball bearing manufacturing clearance section for general group, radial clearance than ordinary group of big bearing ( code name suffix C3 ) specifications are available on request. Conical hole basic type self-aligning ball bearing radial clearance for ordinary group than group C3. 

 

type:
12, 13, 22 and 23 series of self-aligning ball bearing inner hole can be cylindrical or conical. Bearing taper hole is 1: 12 ( code name suffix K ) of self-aligning ball bearing can be mounted directly to the conical shaft, also through an adapter sleeve mounted to a cylindrical shaft, except to provide seamless self-aligning ball bearing, but also provide two
End with a sealing cover of the basic types of self-aligning ball bearings ( code name suffix 2RS ). 

 

Abstract:
Self-aligning ball bearing has two rows of spherical balls, the outer race is provided with a common concave spherical

 raceway, while the inner race is provided with two concave spherical raceways that form an angle with the bearing axis. The

 curvature center of the outer raceway is consistent with the bearing center. The self-aligning ball bearing is 

self-adjusted, and it is not affected by non-centering or shaft deformation flexure 

of shaft and bearing block, so it can compensate the concentricity error caused by these reasons. Except being subject to radial load, this type of bearing can also be subject to bidirectional axial load and their combination load. The load capacity is large,

 and the bearing is provided with preferable shock resistant capacity.

 

 

Series

22200CA,22300CA,22200CC,22300CC,23000CC,23100CA,23200CA,24000CA,23100CC, 23200CC,24000CC,24100CA,23900CA,23800CA,24100CC,23900CC,23800CC

 

 

 

 

Application

For most small equipments like mini-motors, wheel gearing systems, cam gears, generators, high sensitivity servo motors, pressure rotors, printers and photocopiers, regular bearing's precision would be good enough for uses. However, in the case of machine tool spindles, the bearing's precision becomes to a key issue influencing the overall performance and stability.