Angular Contact Ball Bearings 7210 manufacturer

Single row angular contact ball bearings can carry axial loads acting in one direction only. An axial force caused by a radial load imposed on the bearing must be counteracted. Consequently the bearings are normally adjusted by a second bearing.

The single row angular contact ball can only carry axial load in single direction. They are mainly used in the arrangement where there is only one bearing at one end of the transmission shaft.

WGD standard single row angular contact ball bearings have separable and non-separate designs. Contact angle of separable bearings is 15o contact angles of non-separable bearings are 15o 25oor 40o respectively. Separable angular contact ball bearings can be divided into removable inner ring and removable outer ring according to the internal structures.

Angular contact ball bearing wiht an angle 400 can bear conparably heavy axial loads, The strucure of this kind of bearing is non-separable. In order to fill more balls and increase load carrying capacity the shoulder height of each side of inner ring and outer ring is different.

7210b ball bearings details

7200 series Single-row Angular contact ball bearings can sustain radial, axial or combined loads with the axial load being from one direction. The larger contact angle type has better axial load capacity while the smaller contact angle type has higher speed ratings. Available with polyamide, steel or bronze cages/retainers. Available in bore dimension from 10 mm to 170 mm.

Pictures:

Our Services

 Jinan kelunte bearing Co., Ltd.  keep improving and do our best to serve you.

 

1. OEM and ODM  bearing assembly are welcome!

2. Online 24 hours

3. Free sample

 

We are very honored if you come to  visit our factory, welcome at any time