Our commitments are as follows:
1 shaft balancing test must be done after the assembly, shaft ends of the balance sheet welding, unbalance correction, balance sheet welding should be secure, not more than three at each end, which should not be less than the residual unbalance specified in GB9239 G40 balancing quality level.
2 reliable quality welded parts, weld appearance should be smooth without interruption, without Weld, welding slag and other defects. Weld surface forming beautiful.
3. The drive shaft assembly, the hand being, the movement trajectory of the conical surface formed by the universal joint angle in both directions along the reverse, the gimbal smooth, jamming phenomenon may not have a significant gap or gimbal clamp angle should meet the design requirements.
4. When the drive shaft assembly, grease nipple and grease nipple slip fork cross shaft should be on the same side.
5. Universal joint shaft ends should be specified in the phase plane, the deviation is less than 5 degrees.
6. Slide the slider and fork assembly, it should be able to slide axially within the working length of the design requirements, without jamming is like.
7. Front drive shaft out of the factory, all parts should be lubricated lubrication.

  37100-35510 PROPELLER SHAFT ASSY. WITH CENTRE BEARING LN106
37110-35520 T/SHAFT RR LN106, LN111
37110-35580 SHAFT ASSY LN167
37110-60240 T/SHAFT 4S HJ60 FJ60 8/80-10/82 FJ60, FJ62, HJ60, HJ61
37110-60330 TAILSHAFT ASSY 5SP HJ60 FJ60 10/82-8/84

False False Bitmap37110-60380
TAILSHAFT ASSY REAR HJ75 FJ75 11/84-1/90 CAN USE 37110-60530 FJ75, HJ75

37110-60450 TAILSHAFT ASSY REAR, PART TIME 4WD FJ80, FZJ80, HDJ80, HZJ80
37110-60530 TAILSHAFT ASSY REAR FJ75, FZJ75, HJ75, HZJ75, PZJ75

37110-6A250 T/SHAFT RR 78# FZJ78, HZJ78
37110-6A260 T/SHAFT RR 79# FZJ79, HDJ79, HZJ79
37110-6A330 SHAFT ASSY, PRO J998 FZJ105, HZJ105

37140-35013 PROPELLER SHAFT ASSY. FRONT LN46, RN36, RN46
37140-35030 PROPELLER SHAFT ASSY. FRONT LN106, LN107, LN111, LN60, LN61, LN65, RN105, RN106, YN60, YN65, YN67
37140-35071 PROP SHAFT, FRONT KZN165, LN167, LN172, RZN169, RZN174
37140-35190 PROPELLER SHAFT ASSY FRONT HZJ78, HZJ79, RZJ95
37140-60080 TAILSHAFT FRONT (NONCV TYPE) HJ45, HJ47
37140-60090 TAILSHAFT FRONT (NON CV TYPE) BJ40, BJ42, FJ40, FJ45
37140-60121 TAILSHAFT ASSY FT 4SP 8/80-10/82 FJ60, FJ62, HJ60, HJ61

37140-60170

TAILSHAFT ASSY FRONTMTM BJ7# HJ75 FJ7# 11/84-1/90 MTM D19 FJ70, FJ73, FJ75, FZJ70, FZJ75, HJ75
37140-60200 TAILSHAFT FRONT ATM HJ60 FJ62 11/84- ATM FJ60, FJ62, HJ60, HJ61
37140-60280 TAILSHAFT ASSY FRONTMTM FJ75 HZJ75 1/90- FJ70, FJ73, FJ75, FZJ70, FZJ75, HZJ70, HZJ73, HZJ75
37140-60320 PROPELLER SHAFT ASSY. FRONT FZJ70, FZJ75, FZJ78, FZJ79
37140-60330 TAILSHAFT ASSY FRONTMTM FJ80, FZJ80, HDJ80, HZJ80
37140-60430 T/SHAFT ASSY FT MTM FZJ105, HZJ105
37140-60450 T/SHAFT ASSY FT ATM FZJ105, HZJ105
37110-60220 T/SHAFT REAR SWB 7710-800 BJ40, FJ40
37140-35190J T/SHAFT FRT 78/79SER
37140-60240 T/SHAFT FRT 80SER GXL FJ80, FZJ80, HDJ80, HZJ80
37140-60250 T/SHAFT FRT 80SER STD FZJ80.

Quality Assurance Document:
1.Item Testing Plan will be submit to customer in 1 day after contract signed.
2.All the Q.A Document as per Client Requirement will be submitted before final product shipped out.

Packing and shipping:
1 Prevent from damage.
2. As customers' requirements, in perfect condition.
3. Delivery : As per contract delivery on time
4. Shipping : As per client request. We can accept CIF, Door to Door etc. or client authorized agent we supply all the necessary assistant

Drawings

 Size as follows: