Specifications

AAC Brick (Block) Making Machine (Machinery)
$ BENEFIT from 15 years exporting and 25 years producing history
$ ISO 9001:2000

AAC Brick (Block) Making Machine (Machinery)

 

 

Detailed Product Description

 

AAC Plant

Short for Autoclaved Aerated Concrete Plant

 

Brief Introduction of AAC Product

1. Aerated concrete brick is a light and porous building material. It is based on cement, lime, slag, fly ash, sand and made of materials such as gas as raw material.
2. It has the features of being light, keeping temperature, cant be burn, good insulation and others.
3. It can be made into many kinds of sizes e.g 600×200×100, 80×80×180, 240×115×53 and 600×200×125.
4. They could be used in industry building and common building. As one of the earliest and most widely used materials, they are more and more popular in the world and they will replace the Clay brick completely.     

 

Main Features of AAC Product

A.  Light weight

Aerated concrete density is usually 400-700kg/m3, it is about 1/3 of the clay brick weight and 1/5 common concrete block weight. Using the Light brick can reduce the weight of the building and also reduce the loading of the beam of roof and pillar. You can see, it can save the material and cost, it also fight against shaking.

B.   Keeping temperature

It has many porous, the heat transition coefficient is 0.9-0.22W/ (mk), it is just about 1/4 or 1/5 of clay brick, so it is the best materials for keep the room temperature now in the world.    

C. Raw material available widely

There are many kind materials even waste material can be used to produce AAC products, for example: coal ash, sand, waste mine material, coal stone, stone dust, and other silicon materials. 

D. Saving land and energy

When you produce AAC products it use the energy (or fuel) just 11% of the clay brick Products. 

E.  The feature of Plasticity

The AAC Products has one useful advantage is the “Plasticity”. As it is has more foam inside and the weight is lighter and not so hard so it is easy to be produced in every kind shape and when it is re-assemble or re-production it will be more suitable for sawing, paring, drilling, and clinch (clench).

F. Sales Profit

AAC Products’ market profit is bigger than common bricks and cement blocks, especially the AAC Board products (Plate shape AAC Products).

 

Application

AAC brick is applied widely in the world, especially in below conditions and places.

1. 1^st Youth Olympics Games in Singapore
2. Pakistan Flood of 2010
3. Russia Fire
4. Hainan province flood in China
5. In the earthquake of Indonesia and New Zealand
6. Infrastructure in Iraq and Afghanistan
7. 16^th Asian Games Guangzhou
8. EXPO 2010 Shanghai
9. Infrastructure of America
10. London 2012 Olympic and Paralympic Games

 

AAC Production Procedures

1.  All kinds of raw materials Reserve

2.  Measuring and Batching

3.  Add water to raw materials and stir the mixture

4.  Mould ready

5.  Casting

6.  Pre-maintain

7.  Out of Mould

8.  Turnover and cutting

9.  Grouping and sending into the autoclaves

10.  Autoclaving in high temperature

11.  Final products out of the autoclave

12.  Test the final products

13.  Packaging

14.  Palletizing and storing

15.  Delivery

 

 

 

The Types of Aerated Concrete

Aerated concrete product variety can be classifyed into non-load-bearing blocks, bearing blocks, insulation blocks, wall panels and roof five. Among them, the non-load-bearing concrete block production is most widely used, it is generally the size of the density of 500 kg/m3 and 600 kg/m3, mainly to fill in the structure of the wall and wall, rather than bear the load; load-bearing block size density of 700 kg/m3 and 800 kg/m3, in buildings treated with a special structure to bear load; insulation block is generally the size of the density of 300 kg/m3 and 400 kg/m3, mainly used in building insulation, roofing boards and wall panels are reinforced aerated concrete panels, in accordance with different purposes, different from its reinforcement.

 

 

Our Advantages and Strength

1.The steel material supplied by Kehai is from the most famous steel company in china and the world. The mould material is manganese steel and heating treat. The shell of the tank is also made of manganese steel so it is solid and durable.

2. We have the advanced and professional technical team. we can make the mould according to the requirements of the clients. The machine line designs absorb advantages of product of Germany and U.S.A which possesses the most advanced technology in the world.

3. The advanced control unite is easy to operate, it combine the internal achievement and the international famous result. It also can scan the breakdowns automatically. The screen is touching-operating.

4. We have high efficient service system. We also have a professional international service team for abroad clients, you can benefit from their years’ customer-service experience.

5. You can benefit from our 25 years’ producing experience.

6. Since our 1^st set of machine ran in 1996 in Africa, we have exported to India, Canada, Iran, Myanmar, Kazakhstan, North Korea, Indonesia, South Africa, West Africa etc. It is sure that you can benefit from our 15 years’ exporting experience. 

7. Our factory covers 39,000 square meters and our fixed assets is 12M US$.

8. Various equipments are over 100 sets.

9. Our whole personnel over 390 persons is the strong support for your business.

10. ISO 9001 : 2000 certificated.