Product Details

ISO conveyor roller chain for bucket elevator

---Description

1. Wear resistance with alloy steel.

2. ISO,TUV

3. Strong tensile strength with high hardness.

4. Multiple pitch.

---Application scope

This chain is widely used in power plant, metallurgy, cement, chemical, light industry and so on. It is used for lifting coal cinder ,piece coal, crushed stone, mineral stone, egg stone, dry and bulk and fluidity power, granular and block material and so on.

---Operating principle

When the driving device start working , it drives the puley to make the chains with buckets to do the circular movement from the below of the tail to the top of the head The head section has outlet and the tail section has inlet.

The bucket is filled with material and run to the head section, then the material is thrown out from the outlet under the action of centrifugal force according to the parabolic design.With the running, the empty bucket is back to the below tail section and be filled material from the inlet again,then be lifted up to do parabolic discharge movement . So this cycle finish the vertical transport of materials.

---components

Technical parameters

Equipment Type		TB-NE250		TB-NE315	TB-NE400	TB-NE500	TB-NE630		TB-NE800	TB-NE1000
Bucket type		J		T
Capacity(m3/h)		15-25		32-46	50-75	84-120	35-190		216-310	340-480
Bucket	Width(mm)	252		315	400	500	630		800	1000
	Capacity (L)	3		6	12	25	50		100	200
	Bucket distance(mm)	200			250	320	400		500	630
Chain	Pitch (mm)	100			125	160	200	250		315
	Number	1	2
	Broken load of chain(KN)	112/160			160/224	224/315	315/450	450/630		630/900
Diameter of sprocket(mm)		386.37	482.96		618.19	772.74	965.92	1217.06
Bucket speed (m/s)		0.5
driving shaft speed (rpm)		24.71			19.78	15.45	13.26		9.89	7.85