Specifications

wall for plastering machine
>ISO9001:2000;make 6years
>plaster&pump mortar,fireproof
>capacity:60L/min,25bar,3000m2/8hours

                                          JP70-P    Wall for plastering machine 

 

1. It's optional to choose the universal various speed motor or two speed working motor for worm pump. It can spray for ready-mix dry and wet mortar out of a bag or silo.

 

2. The basis for this is a powerful worm pump with a performance of up to 60 l/min.

 

3. Suitable for: materials up to 6 mm grain, e.g. ground coat plasters and insulating plasters, rough coat and textured plasters, trowel plaster, adhesive bonded joint, masonry mortar, refractory mortar, sealing suspensions, injection mortar, filling and anchoring mortar, dispersion plaster, fiber mortar, fibreglass concrete, bonding mortar, floor screed – infinitely variable according to material from approx. 7 l/min to 60 l/min.

 

 

 

 

 

 

Technical parameters

 

 

Model	—	JP70-P
Supply power	—	400V 50Hz
Motor power	kw	4.0/5.1
Maximum grain size	mm	8
Output	l/min	40
Delivery pressure	bar	30
Horizontal delivery distance	m	60
Vertical delivery distance	m	40
Mixer power	kw	—
Mixer volume	l	—
Hopper volume	L	100
Net weight	kg	280
Dimension (L×W×H)	mm	1700×680×660

 

 

1. Wall plastering equipment JP70-P working structure as below, pumping motor and air compressor are made in Germany.

 

 

 1. Make vibrating motor on JP70-P to avoid over lager grain size to block delivery hose and spraying gun.

 

 

 

 

3.  JP70-P has been used for 3years in Mexcio and Philipines for plastering motar.