TOP Supplier Florescence Brand High Pressure Dock Pneumatic Fender for oil boat
USD $1,500 - $1,500 /Piece
Min.Order:1 Piece
Qingdao Florescence Rubber Products Co., Ltd.
TOP Supplier Florescence Brand High Pressure Dock Pneumatic Fender for oil boat
Dear Customer:
Welcome to our website and hope our products will make you satisfied.
We think creatively,design bravely,manufacture precisely and loyalty to our customers.And we are direct We can produce the products according to customer requirements .
Give us a negotiate chance will yield you a surprise
Yours
Florescence
Dock Pneumatic Fender --- On-Time, On-Budget & On-Spec
Pneumatic Fenders have been widely used for berthing structures as well as in ship-to-ship services since 1958. Due to its superior performance, major industries such as oil, mineral ore,
Offshore construction and drilling, fishing and shipbuilding, as well as port authorities and navies all over the world adopt it.
Floating Pneumatic Fenders consist of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized together firmly.
1. the outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2. the reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
3. the inner rubber layer seals the pressurized air inside the fender.
4. fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
TOP Supplier Florescence Brand High Pressure Dock Pneumatic Fender for oil boat:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Yokohama Pneumatic Rubber Fender with CCS and ISO 17357
1)Outer rubber layer
Rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from
abrasion and other external forces.
2)Inner rubber layer
liner of a rubber membrane that seals the pressurized air inside the fender.(In general,we will make some inner
rubber container in advance and inflate them.few days later,we will test the pressure again.The one which it's
pressure did not change is good one.We will put it into store and when clients order we can use it directly.
This can ensure every fender we send to client is airtight one)
3)Synthetic-tyre-cord layer for reinforcement layer
layer made of synthetic-tyre-cord fabric which maintains the internal air pressure of the fender.
4)Flange opening
which is mounted on the fender to which an air valve can be adapted.(our flange are all
Embedded welding, very stable)
5)Initial internal pressure
Air pressure at which an uncompressed fender operates.
Size | Initial Internal Pressure 0.05MPa | Weight ±10% | Initial Internal Pressure 0.08MPa | Weight ±10% | ||
D*L(mm) | R(KN) | GEA(KJ) | Kg | R(KN) | GEA(KJ) | Kg |
500*1000 | 64 | 6 | 25 | 83 | 8 | 25 |
600*1000 | 74 | 8 | 32 | 96 | 11 | 32 |
700*1500 | 137 | 17 | 50 | 178 | 24 | 50 |
1000*1500 | 182 | 32 | 80 | 235 | 44 | 80 |
1000*2000 | 257 | 45 | 100 | 335 | 63 | 125 |
1200*2000 | 297 | 63 | 120 | 386 | 86 | 165 |
1350*2500 | 427 | 102 | 165 | 554 | 140 | 226 |
1500*3000 | 597 | 153 | 315 | 751 | 211 | 370 |
1700*3000 | 639 | 191 | 405 | 830 | 263 | 436 |
2000*3500 | 875 | 308 | 590 | 1138 | 424 | 632 |
2500*4000 | 1381 | 663 | 1050 | 1815 | 925 | 1110 |
2500*5500 | 2019 | 943 | 1333 | 2653 | 1317 | 1410 |
3000*5000 | 2104 | 1210 | 1880 | 2709 | 1571 | 2155 |
3000*6000 | 2583 | 1485 | 2160 | 3292 | 1888 | 2470 |
3300*4500 | 1884 | 1175 | 2020 | 2476 | 1640 | 2300 |
Factory established in 1992, Qingdao Florescence Rubber Products Co.,Ltd is a comprehensive marine equipments enterprise, integrating the scientific research design, product development with technical services. FLORESCENCE is a leading professional manufacturer of pneumatic rubber fenders, foam fenders, various marine rubber fenders, and ship launching&salvage rubber airbags. FLORESCENCE products are designed, manufactured, and tested per ISO 9001 requirements. And every unit robustly built to the stringent requirements of ship surveyors such as CCS, BV, LR, GL, etc
1."I have ships but don't know how to choose the size of marine fenders ,can you help me."
Answer: Don't worry .We have more than 20 years' experience. Pls tell me information of your ship, we can suggest suitable size for you.
2."I want to try your marine fenders, but I never use it and don't know how to use ,can you help me?"
Answer: Don't worry. We will send instruction book together with marine fenders.
3."What's your MOQ?"
Answer: Our MOQ is 1PC.
4."How about the lifespan of your marine fenders?"
Answer: Designed lifespan of our marine fender is 6 to 10 years
5."What's your warranty period ?"
Answer: Our warranty period is 2 years. we will responsible for the repairment or replace the new ones for you if it proved to be our quality problem.
6."What kind of certificate can you provide ?"
Answer: CCS, SGS etc. certificate is available.
SDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber FenderDock Rubber Fender