zircon nylon flour mill mesh 13XXX
USD $0.5 - $20 /Meter
Min.Order:30 Meters
Shanghai Shangshai Bolting Cloth Manufacturing Co., Ltd.
zircon nylon flour mill mesh
GG Series Flour Mesh
GG Series:Plain weave,mono filament and double filament.Material including polyester and nylon(PA6 and PA66).Widely used in milling industry,such as flour milling, corn milling, and other grains milling.
Mainly used for griting gauze for coarse and scalping sieves.
GG Flour Mesh | |||||
Model | Mesh Opening | Thread Diameter (um) | Base (cm) | Open Area(%) | Square Meter/g |
10GG | 2000 | 550 | 3.9 | 61.5 | 237.3 |
12GG | 1800 | 450 | 4.4 | 64.0 | 180.0 |
14GG | 1600 | 400 | 5.0 | 64.0 | 177.8 |
15GG | 1400 | 400 | 5.6 | 60.5 | 197.5 |
16GG | 1300 | 350 | 6.1 | 62.1 | 165.0 |
18GG | 1188 | 350 | 6.5 | 59.7 | 177.0 |
19GG | 1080 | 350 | 7.0 | 57.0 | 190.4 |
20GG | 1000 | 300 | 7.7 | 59.2 | 153.8 |
22GG | 950 | 300 | 8.0 | 57.8 | 160.0 |
24GG | 850 | 300 | 8.7 | 54.6 | 173.9 |
26GG | 800 | 300 | 9.1 | 52.9 | 181.8 |
27GG | 750 | 250 | 10.0 | 56.3 | 138.9 |
28GG | 710 | 250 | 10.4 | 54.7 | 144.7 |
30GG | 670 | 250 | 10.9 | 53.0 | 151.0 |
31GG | 610 | 250 | 11.6 | 50.3 | 161.5 |
32GG | 600 | 250 | 11.8 | 49.8 | 163.4 |
34GG | 560 | 220 | 12.8 | 51.5 | 137.9 |
36GG | 530 | 220 | 13.3 | 49.9 | 143.4 |
38GG | 500 | 220 | 13.9 | 48.2 | 149.4 |
40GG | 475 | 200 | 14.8 | 49.5 | 131.7 |
42GG | 450 | 200 | 15.4 | 47.9 | 136.8 |
44GG | 425 | 200 | 16.0 | 46.2 | 142.2 |
45GG | 400 | 180 | 17.2 | 47.6 | 124.1 |
47GG | 375 | 180 | 18.0 | 45.7 | 129.7 |
50GG | 355 | 150 | 19.8 | 49.4 | 99.0 |
52GG | 335 | 150 | 20.6 | 47.7 | 103.1 |
54GG | 315 | 150 | 21.5 | 45.9 | 107.5 |
56GG | 308 | 150 | 21.8 | 45.2 | 109.2 |
58GG | 300 | 150 | 22.2 | 44.4 | 111.1 |
60GG | 280 | 150 | 23.3 | 42.4 | 116.3 |
62GG | 275 | 150 | 23.5 | 41.9 | 117.6 |
64GG | 265 | 150 | 24.1 | 40.8 | 120.5 |
66GG | 250 | 120 | 27.0 | 45.7 | 86.5 |
68GG | 243 | 120 | 27.5 | 44.8 | 88.2 |
70GG | 236 | 120 | 28.1 | 43.9 | 89.9 |
72GG | 224 | 120 | 29.1 | 42.4 | 93.0 |
74GG | 212 | 120 | 30.1 | 40.8 | 96.4 |
remark:The above data is theoretical and for your reference only. |
XXX /MF Series Flour Mesh
General Introduction:
XXX/MF Series:With high extraction, and quality can meet to FDA standard.Mesh opening can reach 80micron,can be used for ultra fine flour milling.Including nylon,polyester and stainless materials,standard width127cm/145cm/165cm,also can be made as your request.
For medium to hard wheat and high capacity sifters