Specifications

screw press
1.treatment capacity:0.8-5m3/h
2.screw diameter:200-450mm
3.material:carbon steel or stainless steel

LXY waste water treatment screw press dewatering machine

 

  Sewage treatment sludge dewatering;Kitchen kitchen waste crushing;Municipal sludge dewatering;Fiber material enrichment and squeeze dehydration;Used in liquor-making industry, rice wine lees dehydration, such as ethanol, fine chemical, feed additive industry such as dehydrated dirt from the inlet to press tube, under the action of squeezing screw and material extruded tube, compression to after dewatering mouth, squeeze the sewage through the drain into the entrance channel;Squeeze dewatering machine is provided by the squeeze tube, squeezing screw, material extrusion tube, into the hopper, sink, outlet and drive reducer, etc.

Technical parameters

 

 Note: when ordering indicate the equipment material and reducer requirements;Press to play after installation screw expansion bolt positioning;So don't need to be embedded parts;Special specifications shall be separately designed
The product will be out of the water floats, grille and cleaner by screw drive into the press the main body, in the process of transmission is squeezed, dehydration, the final slag pressure is unloaded into collecting container, make easy to transport waste, landfill and incineration.
The product is suitable for urban and planning district sewage treatment plant, waterworks and municipal rain, sewage pumping station grid slag processing.