Specifications
sand water separator1.treatment capacity:15-35L/S
2.Motor power:0.37-0.75kw
3.Speed:4.8r/min
4.material:carbon steel or ss
XSF type fine spiral sand water separator
Use and Brief
XSF type spiral sand water separator for sewage treatment plant, will sink sink sand pool sand pool of water from sand to split water sand mixture.
Structure and working principle
XSF sand water separator from no shaft lining spiral, article u-shaped slot,, water tank, guide plate and drive equipment etc.
The working process of the sand mixture water from separator: top end, the mixture of moderate to input water tank large such as sand will be deposited on U shape at the bottom of the tank, in a spiral prodding, the sand along the buy U shape the groove bottom ascension, leave after liquid surface goes on from a distance, to continue in full by the row after dehydration sand sand discharge to mouth filled with sand sand barrels, and the separation of water discharge from the relief mouth inside the plant and sent to the pool.
Special point
1, separation efficiency can be as high as 90 98%, can be isolated quartile particle size of 0.2 mm particles.
2, the spiral, without the water without shaft bearings, maintenance is convenient.
3, compact structure, light weight.
4, new transmission device, the key parts of the shaft speed reducer for advanced loading,
Don't coupling, installation to easily in.
5, article lining for fast loading type, convenient to replace.
6, spiral axial position can be adjusted, easy to adjust its tail and the security clearance. The box
Specifications and main technical parameters
Note: special specifications according to user requirements design and manufacture
Appearance and installation size