A, product introduction
Rotary grille decontamination machine is widely used in municipal sewage treatment plant, waterworks, pump stations, water inlet of power plant, automatically intercept and remove the floating in the water in a row, guaranteeing the normal operation of the next working procedure also can be used as a textile, printing and dyeing, slaughtering, leather, paper making, wine, sugar, and food industries in the solid-liquid separation.
Rotary grille decontamination machine
USES:
Rotary grille decontamination machine (also known as "solid liquid separator") is widely used in municipal sewage treatment plant, waterworks, pump stations, water inlet of power plant, automatically intercept and remove the floater in the water in a row, guaranteeing the normal operation of the next working procedure.Also can be used as a textile, printing and dyeing, slaughtering, leather, paper making, wine, sugar and food industries in solid-liquid separation.
Second, the device is made of ABS engineering plastics, nylon or stainless steel special tine, according to certain axis tine in the assembly of the order form enclosed rake tooth chain, its lower installed in the drainage water.When directional rotating at a constant speed drive sprocket drive system, the whole chain of tine and bottom-up movement, and they carry a solid impurities separated from the liquid, the fluid is through tine grid gap flow in the past, the condition is continuously.
Because of the special structure shape make tine tine chain carries debris arrived at the top to movement, front and rear self-cleaning relative movement between the tine, prompting sundry rely on gravity fall off.
Note: behind the equipment can be set rotation of cleaning brush, further away all stranded in tine dirt, such as the need to configure the clean-up brush, indicate the time.
Electrical control
Regular for manual control.
Electronic control with PLC interface;With other equipment linkage;Can control the time;Can control the liquid level, such as grid accident blocked during outage time, water level before the gate of the accident in high water level set, decontamination machine can immediately start and not restricted by cycle;Can control the liquid level difference, such as grid accident blocked during outage time, make the water level difference of before and after the gate setting, decontamination machine can work immediately.When the user needs should be indicated with order.
Ordering instructions
1. When placing order, technical parameters of the parameters in the upper right corner * should indicate;
2. Should indicate the main material of the equipment (all carbon steel or stainless steel or stainless steel);
3. The tine material ABS, nylon, stainless steel, when placing order, should clearly indicate;
4. Don't indicate that the electric cabinet as conventional control, if you have any special requirements shall be separately indicated
5. Medium temperature 60 °C or less and special water quality should be marked.
Three, the characteristics: the equipment is one of the biggest advantages is the high degree of automation, high separation efficiency, low power consumption, no noise, corrosion resistant performance is good, in the case of unattended can guarantee the stability of continuous work, set up a overload safety device, the device fails, will automatically stop, can avoid the equipment overload.
This equipment can be adjusted according to the needs of user equipment operation interval, achieve periodically;Can be based on grid level difference before and after automatic control;And, with manual control functions to facilitate maintenance.The user can choose according to the needs of different jobs.
Due to the equipment structure design is reasonable, the equipment work, own strong self-purification ability, not the clogging phenomena, so the daily maintenance work very little.
Four, technical parameters and type selection
1. Equipment and tine specifications
Equipment specification according to the size of machine wide HF300-3600.Machine more than 1800 mm wide, and online.Tine grid gap is divided into 1 mm, 3 mm, 5 mm, 10, 20, 30, 40 mm mm mm mm, 50 mm and so on each kind of specification, type selection by water, hoisting height, amount of solid-liquid separation and separation material shape, particle size to choose, at the same time equipped with different material.
2. The device length specifications
Equipment standard groove deep 1535 mm, can be used according to user needs and the actual situation any longer.Special specifications shall be separately designed.
