Specifications

UASB anaerobic reactor
1. Operation weight: 110-750ts
2. water treatment volume:56-570m3
3. Gas storage capacity:37-480m3

UASB type Anaerobic reactor for sewage treatment

 

 

 

UASB is upflow anaerobic sludge bed reactor, the whole reactor can separate two parts: the reaction zone and gap, liquid and solid separate zone. Sewage upward to the bottom of the anaecobic reactor through pump, make use of the bottom water distributiong system, sewage evenly arranged on the whole cross section.While taking advantage of the water outlet pressure and the role of the gas production, let wastewater full contact and transfer with anaecobic sludge, degradation of organic matter in the wastewater. The wastewater upward slowly at the reactor zone,further degradation of organic compounds. Gas, water and sludge rising at the same time, biogas first enter into three-phase separator exhause through pipe, sludge and sewage rising to the sepatator zone through the gap of three-phase separator, sludge precipitate,degradate and reflux to the bottom of three-phase separator at the separator zone, keep the biologicald quantity of internal anaecobic recator, precipitated water discharge the reactor through pipe.

 

Working Principle 

 

Effective use of anaerobic bacteria own condensation and curing effect, in certain hydraulic conditions, grannlar sludge formation. These high concentrations of granular sludge has large specific surface area, has the very high treatment efficiency of COD, of organic wastewater dissolve product load can be as high as 10 to 25 kg/m3.

 

Applicable scope

 

This equipment is widely used in high concentration organic wastewater treatment.

1. Food processing, brewing, sugar, starch, monosodium glutamate wastewater etc organic wastewater.
2. The leather making, the fur, processing wastewater.
3. The papermaking, the pulp wastewater.
4. Slaughtering, wool processing sewage.
5. Pharmacy sewage and wastewater.

Project cases

 

UASB Anaerobic Reactor with good quality

 

Product photos