Jenson Oil-immersed submersible water pump

* Environmental protection,  beautiful appearance,convenient installation 220V-380V new style   Jenson Oil-immersed submersible water pump  . 

*Jenson QY Oil-filled submersible pump consists of pump, mechanical seal and motor. pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is monophase or triphase is at the upper part of pump and seal is used where pump and motor combine, which is a kind of double end mechanical seal, "O" rings are applied to all static joints.

*This series pump because of wide range of flow and head, is extensively used for electrical irrigation, forest water spraying, pumping water from well, water tower  deliver and urban construction water supply and discharge for farms, villages, industrial and  mining enterprise.

*Jenson Oil-immersed submersible water pump normal life is five years! Warranty time:1year(Under normal use and service from the date of purchase

Technical data  for low power pump                                                                 

Technical date multistage high power                                                      

Power                                                                                                        

1) Main power: 220V~380, 50Hz /60Hz.

2) as your requirments 

Motor                                                                                                         

1) Degree of protection: lp44
2) Insulation class: F 

Construction materials                                                                            

Mounting positions                                                                                   

The pump can work properly and continuously under following operational conditions:
1. Medium is not corrosive. Sand contents should be max.0.10% by volume and granular size should be max.0.20mm.
2. Medium temperature shouldn''''t be over 40°C and PH should be 6.5-8.5.
3. The pumps should be operated within rated head.
4. The pumps should be fully submerged into water with depth of less than 3m and max. The pump should be min.0.5m over the  water bottom and not be inserted into sludge.
5. Power frequency should be 50Hz, single phase voltage 220V, three-phase voltage 380V, and voltage fluctuation should   be 0.9-1.1 times than the rated.

Pump equipment                                                                                      

  1) CE, SGS, RoHS certificated.

  2) 100% copper wire, stainless steel shaft, brass/cast iron outlet.

  3) Wide voltage range design, single-phase and three-phase.

  4) Strict complete testing for each product.

  5) Dedicated sales representative .

  6) 1 year warrenty ,  according to our general sales conditions .

Jenson Oil-immersed submersible water pump

 *  Jenson Water Pump & Submersible Pump be packed  in strong carton with two foams fixed , 1 Pcs/ctn  or  as your requirements 

 * Jenson water pump can be shipped by sea , air , international fast express after 30% deposit in advance,the rest T/T against copy of B/L.

Jenson Oil-immersed submersible water pump

* The superior manufacturer in Jenson Oil-immersed submersible water pump with 12 years of experience in this field, welcome OEM 

* The confident and the best &  reliable supplier for you .

* 24 hours service , reply timely .

* Devote Provide you 100% satisfaction for customer from pre-sale to after-sale .

* Best quality , best price , best service , all the best . Experienced worker and design team, strict quality control  system .