slot type wood debarking machine/ roller type wood barks/ skin stripping machine 

machine introduction 

This machine can be used to peel various kinds of wood especially wood with lots of fibers. The diameter of the wood log could be 20-500mm.
It is applied to debark and treat fresh cut soft wood, some broad leaf wood, some frozen wood and dry wood. Wood with different spices, diameter, length, shapes can be processed by this machine.

machine working principle 

Adopt the open bin, one end feeding, another end out material of a pipelined operation, to overcome the existing power cut feeding, discharging, segmented way of working shortcomings, high work efficiency.

As the teeth impact of wood segment, the wood doing circular movement within the housing, and the rotation around itself, so the peeling effect is high. On frozen wood, dry wood and hard skinned species also has a good peeling net rate

Adaptability of wood, can be of different species, diameter, length and shape of the timber peeling. As the wood does rotary motion and the irregular beating, the bending log uneven part can be well touched with peeling tooth. So the net rate of bending wood peeling is much higher than other drum.

The housing is fixed, low energy consumption, low failure rate, maintenance workload is small, low vibration and noise, the machine can produce on the ground directly, even do not install the base, easy to operate.

machine parameters 

pls feel free to contact me