Specifications

Less Investment
Larger Effectiveness
Power Saving
Strong Cooling Effect
Superior Air Quality

1.Summary:

 

The Single Layer Portable Air Cooler With Remte Controller is a set of cooling,ventilation, dust odor in an 

 

evaporative cooling ventilation unit. By the large surface area of specialty corrugated paper- like nest of

 

honey wet curtain, energy efficient fans, water system, water float valve device. 

 

Chassis and electrical components and other components. When the fan is running a negative

 

pressure chamber of household air cooler, so that outside air into the cavity through a highly absorbent wet

 

curtain of water on wet curtain evaporated under adiabatic state, take away a lot of latent heat, purifying,

 

cooling oxygen the air- conditioning was fan into the workshop, through continuous convection, so that the

 

factories and workshops to achieve the cooling effect.

 

2.Advantages:

(1) Less investment, performance 

(2) Using environmentally friendly can not close the doors and windows. 

(3) Able indoor cloudy, hot and smelly air to replace exhausted to the outside. 
(4) Less power consumption, electricity consumption per hour in 0.5 - 0.8 degrees, no Freon. 
(5) Each household air cooler air volume :1000-4000 cubic meters per liter. 
(6) Each covering an area of cold 20 - 40 square meters. 
(7) Cool main pieces (wet curtain) are imported.

 

3.Specification:

 

 

Specification	Voltage	Fan Type	Power	Air Flow(m³/h)	Noise	Pump Power	Water Consumption	Cooling Capacity	Outer size(mm)	N.W.
GLT-55	220v	Centrifugal	280w	5500	≤45db	18w	2.5-3.0L/h	3500Btu	850*450*1300	28kg

 

4.Product: