Product Details

High efficiency Cost-saving single screw floating fish pellet feed machine with 250kg/h

Floating Fish Feed Extruder Introduction:

1. Composed of feeding system, extruding system, cutting system, controlling system.

2. Adopt Auto-temperature Controlling System which making it more precise and viewable to control the temperature.

3. Combined main shaft can apply to a variety of materials

4. Special designed screw barrel make the machine more durable and reducing cost.

5. Cutting system equipped advanced frequency converter and sophisticated speed-adjusting system. The granules size is adjustable.

6. Works well in long time and continuous using, running steadily and reliably, easy to operate.

The Features of Fish Feed Pellet Machine

1. Fish food made by this pellet extruder is of puffing type, more easily to digest for fishes.

2. The fish feed pellet size can be from 0.9-10mm to feed different sizes of fishes.

3. The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours.

4. High temperature and high pressure process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.

5. Make high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc. and meanwhile, Ideal for making pet food for dogs, cats, etc.

The Working Process of Floating Fish Feed Pellet Extruder

When the raw material is sent into feeding device, they will be pressed by the screw shaft with high pressure and temperature which can make the raw material fully cooked and sterilized. Then the pressed material will be formed into pellets by shaping mold. After that a cutting device will cut the formed pellets into different length as required.

Attention

**Our fish feed extruder is of single screw design.

**The pellets extruded from pellet mill is about 80°C and moisture content is 18%-20%, so you should equip a dryer and cooler if the capacity is more than 500kg/h. While for small capacity, you can dry them in the sun.

**We provide technical formula for making floating fish feed pellets after placing order.

**We send extra easy wear parts for free including two sleeves, one screw, one cutting knife and three die moulds.

Dry Type Floating Fish Feed Machine Technology Data

Model (dry type)	Capacity (kg/h)	Main power	Feeder Power	Cutting Power	Screw Diameter
AUS-DGP60-C	120-150	15KW	0.4 KW	0.4KW	Φ60mm
AUS-DGP70-B	180-250	18.5KW	0.4 KW	0.4 KW	Φ70 mm
AUS-DGP80-B	300-350	22-27 KW	0.4 KW	1.1 KW	Φ80 mm
AUS-DGP90-B	400-450	30-37 KW	1.1 KW	1.5 KW	Φ90 mm
AUS-DGP120-B	500-700	55 KW	1.1 KW	2.2 KW	Φ120 mm
AUS-DGP135-B	800-1000	75 KW	1.1 KW	2.2 KW	Φ133 mm
AUS-DGP160-B	1200-1500	90 KW	1.5 KW	2.2 KW	Φ155 mm
AUS-DGP200-B	1800-2000	132 KW	1.5 KW	3.0 KW	Φ195 mm

Wet Type Floating Fish Feed Machine Technology Data

Model (wet type)	Capacity (kg/h)	Main Power	Feeder Power	Cutting Power	Conditioner Power	Screw Diameter
AUS-DSP60-III	180-200	15 KW	0.75 KW	0.4 KW	0.37 KW	60mm
AUS-DSP70- III	250-300	18.5 KW	0.75 KW	0.75 KW	1.5 KW	70mm
AUS-DSP80- III	350-400	22-30 KW	1.1 KW	0.75 KW	1.5 KW	80mm
AUS-DSP90- III	500-600	37 KW	1.1 KW	1.1 KW	2.2 KW	90mm
AUS-DSP120- III	700-800	55 KW	1.1 KW	1.1 KW	2.2 KW	120mm
AUS-DSP135- III	1000-1500	75 KW	1.5 KW	2.2 KW	2.2 KW	135mm
AUS-DSP160-III	1800-2500	90 KW	2.2 KW	2.2 KW	3.5 KW	155mm
AUS-DSP200-III	3000-4000	132 KW	2.2 KW	3.0 KW	4.5 KW	195mm