SS304 AMS-DZ series cooling style drum flaker equipment with good quality
USD $10,000 - $50,000 /Set
Min.Order:1 Set
Zhengzhou Amisy Trading Co., Ltd.
SS304 AMS-DZ series cooling style drum flaker/Condensing crystallization slicer with good quality
Hot selling AMS-DZ series cooling drum flaker with good quality with good quality
Hot selling AMS-DZ series drum flaker with good quality with good quality
026 Vacuum Dryer Harrow Dryer Industrial Vacuum Dryer 0086-13937128914
AMS-DZ series drum flaker with good quality
The performance and characteristics of products
1. There are 2 kinds of fabric way, after the points on the cloth and feed.According to the characteristics of chemical material, there are single drum and dual drum.
2. The material slot insulation steam heat preservation, heat conduction oil circulating thermal insulation, electrical heating oil heat insulation
3. The equipment is divided into open type and semi-closed, fully enclosed, vacuum, nitrogen protection type.
4. The blade material, brass, tin bronze, steel, nylon, bakelite, phenolic resin, alloy saw blade.
5. Discharging system have single, double, save out.
6. Special requirements: the rules of the shape and size, can ensure that the material of the slice thickness and size evenness.
7. Or cooling (heating) systems have jacketed type and spray type or special disturbed flow technology, according to the size of the slicing machine specification and material properties to design, can increase in thermal efficiency and increase the drum strength, and improve production, relative products by actual measurement, than conventional production machine production can be increased by 0.3 to 1 times.
8. Adopting rotary joint, and can prevent water leakage, and the application of new process, reduces the consumption of cooling water.
9. Drum at both ends are heat insulation layer and side scraper, does not produce material on both ends of the drum, and therefore there is no friction power consumption on both ends of the drum, eliminates the end knot material and start due to instability problems.
Model | Drum size | Power KW | Slice speed r/min | Size mm | ||
L | W | H | ||||
DZ-1 | 400×500 | 2.2-3 | 2.5-12 | 1400 | 800 | 1200 |
DZ-2 | 600×600 | 2.2-3 | 2.5-12 | 1550 | 1000 | 1400 |
DZ-3 | 600×800 | 3-4 | 2.5-12 | 1750 | 1000 | 1600 |
DZ-4 | 800×1000 | 4-5.5 | 2.5-12 | 1950 | 1200 | 1800 |
DZ-5 | 800×1200 | 4-5.5 | 2.5-12 | 2200 | 1200 | 1800 |
DZ-6 | 1000×1000 | 4-5.5 | 2.5-12 | 1950 | 1400 | 2000 |
DZ-7 | 1200×1200 | 5.5-7.5 | 2.5-12 | 2200 | 1600 | 2200 |
DZ-8 | 1200×1500 | 5.5-7.5 | 2.5-12 | 2600 | 1600 | 2200 |
DZ-9 | 1500×1500 | 5.5-7.5 | 2.5-12 | 2600 | 1900 | 2500 |
DZ-10 | 1600×1800 | 7.5-11 | 2.5-12 | 3000 | 2000 | 2600 |
DZ-11 | 1600×2500 | 11-15 | 2.5-12 | 4200 | 2100 | 2600 |
DZ-12 | 2000×2000 | 11-15KW | 2.5-12 | 3700 | 2500 | 2900 |
DZ-13 | 2500×2000 | 15-21KW | 2.5-12 | 3700 | 3000 | 3400 |
DZ-14 | 1900×3000 | 15-21KW | 2.5-12 | 4700 | 2400 | 2800 |