Percussion type stainless steel fog nozzle
USD $2 - $3 /Piece
Min.Order:100 Pieces
Tianjin Xin Rich Source International Trade Co., Ltd.
JM Fine mist atomising nozzle
Products Information
Orifice(mm) | Flow rate(L/min) | Pressure(PSI) | Male size |
0.15 | 0.035-0.05 | 435-1015 | NPT1/8-27 |
0.20 | 0.06-0.09 | 435-1015 | NPT1/8-27 |
0.30 | 0.095-0.165 | 435-1015 | NPT1/8-27 |
0.40 | 0.14-0.22 | 435-1015 | NPT1/8-27 |
0.50 | 0.17-0.285 | 435-1015 | NPT1/8-27 |
We can make the nozzles as your requirement, the smallest orifice is 0.05mm and the accuracy can be ±0.002. This technology has reached the world advanced level. Connector usually is 1/8" NPT, we also can provide you with 1/8" BSPT, and the metric system M10*1.
Working Temp: normal
Medium: oil gas and liquid medicine
Material: body is stainless steel or brass. Nozzle tip can be stainless inserted (TJGS-S) or ruby inserted (TJGS-P). Generally, TJGS-S can meet your need, and its cost is lower. It can meet your requirement basically. In the hard occasion, you can use TJGS-P, as the nozzle tip can stand the shock and friction results from the high speed flood. Thus the wear resistance of nozzle tip is prompted mostly, and make the nozzle has a long life. WE advise that the most pressure used on the stainless steel nozzle should better be 70bar and 100bar on the ruby, it will result the wear of the nozzle and lead the nozzle's life reduced, if the working pressure exceed the most.
Application