A- Semi-Auto spray mode: the drone reaches the work starting point (home point), go forward automatically by commend. After receiving instruction of changing line, aircraft will automatically fly to the left or the right, then hovering, waiting for continuing operation command. The speed is equal to the setting speed, and spray width is equal to the settings. 

B- A to B Auto spray mode: After recording the A and B points. Executing AB mode, then drone will start spray and automatically fly from A to B point, backward from B to A, the speed is equal to the setting speed, and spray width is equal to the settings.

C- GCS mode: Under regional flight mode, the aircraft can fly back and forth at a certain distance in specified region to cover the entire region. The speed, spray width, height are all equal to the settings.

GPS/ATT/Spray working mode

Security Protection

Low voltage protection

One-key to return

Failsafe mode

Flight restriction

Flight speed and height can be set

Intelligent orientation control mode

A-B point auto navigation with fixed speed

Skyway flight mode(Max support 128 waypoints)

* is optional hardware request

Breakpoint continue to spray

* is optional hardware request

Radar (Auxiliary setting height)

* is optional hardware request

A- Radar

  Radar helps to keep the height during flight. It is very good for rice, wheat, cotton, corn spray working.

B- Continue to spray at the breakpoint

  When encountered the following situation, AG drone will record the breakpoint and can perform the function of continued spraying from the breakpoint. The omission of the operation area can be avoided.

C- Low voltage protection:

  1- When the lower voltage is trigger, the voltage achieve the lever the drone will return to home and land automatic.

  2- The voltage of the drone can be display on the remote control and alarmed when the voltage reach the set. (EXT is the voltage of the drone’s voltage)