Angle bead &Corner bead Introduction

Angle bead &Corner bead

Angle bead ( corner bead )have a smooth round nose bead with diamond mesh wings for the keying of plaster right up to the nose of the bead.On the outside is the finished edge which is where one side of your drywall knife runs on when you are applying drywall mud. The two flanges sit flat on your raw drywall. The diamond decoration along the length of the flange act as a keyway for holding the drywall mud to the drywall and the corner. This mesh insures a perfect bond and provides effective reinforcement where most needed. Straight edge nose is easy to install and permits plumb straight outside corners. Excellent protection for corridor corners exposed to traffic.

Angle bead &Corner bead  Details Description 

1.Materials of Drywall Angle Bead:  

Galvanized steel plate, stainless steel plate, aluminium plate, etc.

2.Lengths of Drywall Angle Bead(Corner Bead): 

Common size: 2.4m, 2.7m, 3.0m, etc. Available upon customers' request.

3.Kinds of Drywall Angle Bead: 

Expanded Corner Bead, Perforated Corner Bead, Corner Bead with Reinforce Flange, Corner Bead with creased Reinforce Flange, etc.

4. Applications of Drywall Angle Beads:

Corner beads offered include metal products processed corner beads and plaster beads. Products available with Corner Beads, Corner Beads for Exterior Render, Plaster Beads, Lower Raked Render Bead, Corner Beads for Traditional Walls, Expanded Corner Bead, Perforated Corner Bead, Angle Bead and Plaster Casing Beads.

Chief Angle Beads According to Uses:      

 Corner Beads for Raked Render Angles:     This kind of corner bead provides a finish and protects external raked render angles. Using of this metal corner beads enables adjustment of all thickness renders.

Technical Description:     Materials: Galvanized expanded metal sheet or perforated metal sheets.     Can be made with P.V.C. nosing.     Corner beads for raked render angles have three standard models for render thicknesses of 8, 10 and 15 mm.     

Dimensions:     Corner beads have 42 mm wings. Length of angle bead can be 225, 250, 300 cm. 
  

Corner Beads for Exterior Render:     This angle bead finishes and protects inside brick. Then the wall angles can be plastered. Using of corner beads for exterior render allows adjustment of render thickness to 6 mm.

Technical Description:    Materials: Galvanized steel sheets.    Features: Sharp angle. Expanded metal wings have slots so that the render grips the inside wall perfectly.
Dimensions:    25 x 25 mm. Length: 2, 2.5 linear meter
 

Interior Corner Drywall Bead:

 Interior corner beads are the most easily forgotten aspect of a drywall job. Designed for internal use plaster uses, manufactured from quality galvanized steel sheet, perforated mesh. Solid flanges are preferable. Corner bead are adapt to framing irregularities and to match appropriate screed heights. 90º and 135º Internal corner beads are designed to give you perfectly straight, sharp inside corners every time. Use Inside corner for finishing wall niches quickly and easily. 90º and 135º Internal corner beads are self aligning and is perfect wherever crooked framing is a problem or when drywall doesn't meet perfectly in the corner. 

 Angle bead &Corner bead Payment Terms

Angle bead &Corner bead Delivery Time & Packing

 Angle bead &Corner bead Quality Test

Our Fair

About Us

Contact Me