Hot sale CE approved WQ-55 chicken plucker
USD $125 - $150 /Piece
Min.Order:1 Piece
Dezhou Weiqian Import & Export Co., Ltd.
Hot sale CE approved WQ-55 chicken plucker
Type | WQ-55 |
Work ability | 13kg/(0.5-1)min |
Depilation net rate | 98% |
Net Weight | 55kg |
Gross Weight | 60K g |
Main axis Rotational speed | 180R/min |
Motor Power | 600W |
Barrel diameter | 600mm |
Machine Dimension | 60*60*90cm |
Depilate object | Chicken duck. Goose.Quail |
with chicken accurate) | 7-8 only |
Chicken Plucker Introduction
There are four models(WQ-30,WQ-40,WQ-55,WQ-60 )poultry plucker produced in our factory.Their designs are much the same as the above picture.The main difference of
them is the different production capacity. Comparing with the traditional way of plucking by hand.The production
efficiency of our chicken plucker is very high. Taking the model WQ-55as an example,
chickens can be plucked by it at a time and they can be fully removed in just 0.5-1 minute.
Although it named as plucker,it also can be used for plucking duck's feather,goose's feather and bird's feather etc.With high density of plucking rubber fingers,poultry's feather can be completely plucked.
Chicken Plucker Definition
Poultry feather removal machine is used to remove the feather of poultry after butchered.It is also suitable for the peeling of ginger,potato,and the skin removing of fish.
Chicken Plucker Using Method
1. Scald the poultry after slaughtered by hot water of 65-80 degree for 25-30seconds
2. Then turn on the machine,put the scalded poultry into the machine(ginger,potato
and fish can put into directly).
3. After 10 seconds working,turn on the tap,and wash away the removed feather,
then take out the poultry.
Best Selling Stainless Steel Automatic Chicken Plucker for Sale
Chicken Plucker Attention
1. Equip a leakage switch on the ground line.
2. Turn on the switch,and check if the machine running normally before using.
3. Wash the tube completely after using.
4. After long time using,please change the robber stick when they are wearing or broken. So as to ensure the working efficiency.
5. After a period of using,if the rolling disc become slower,it might be the belt screw track slip.
6. Then please adjust the nut on the machine base, but note it can't be too tight