Product Details

Car vacuum cleaner /home vaccum cleaner /outdoor vaccum cleaner

Features:

- Light weight unit, perfect for use in the garage or travel.

- Cleans up liquid spills and dry debris quickly and easily.

- 3 foot hose allows you to remove dirt and liquid spills in hard-to-reach places.

- Easy plug-in operation with an extra-long 7-foot power cord for greater reach during cleaning.

- 4 useful attachments for cleaning and inflating.

- 12V DC power plug for convenient use in your car, boat or RV.

- Suitable for all types of 12V cigarette lighter vehicles.

Specification:

1-Input Voltage			DC 12V car vacuum cleaner
2-Output Current			7-8A
3-Output Power			80-90W
4-Power Source			DC cigar-lighter with fuse
5-Rotational Speed(Brushless motor,all copper)			34000rpm
6-Vacuum			2.2-2.4 KPA
7-Switch			ON/OFF
8-Wire Cord			260CM
9-Product Weight			815+/-5g, top part with motor(ABS+PP)+ bottom black bucket(PP)
10-Vacuum hose weight			95g 98CM HDPE
11-Nozzle attachment			10G+/-1.5g ABS
12-crevice attachment			24g+/-1.2g ABS
13-Brush attachment			59g+/-2g ABS
14-Brush			5g+/-0.6g ABS

Assembly and Operation
1. Check that the permanent filter completely covers the motor opening.Important!
Never operate the appliance without the filter.
2. Place the appliance upper section on the dust collector
3. Fasten the 3 fastening clips by hooking onto the dust collector at bottom and pushing up.
4. Insert the end of the suction hose in the suction opening.
5. Connect supplied accessories to vacuum cleaner according to intended application.
Fasten the required nozzle to the other end of the suction hose. The floor nozzle is very suitable for vacuuming dirt
on vehicle floor and seats and in the boot. Attach the brush to the floor nozzle to removed driedon dirt and fluff
(hook on at top, press down and clip into place). The slot nozzle is particularly suitable for areas that
are not easily accessible such as corners, edges and narrow gaps.
6. Insert the plug into the cigarette lighter socket of your vehicle or boat. Please make sure that the supply voltage is 12 V .
7. Switch on the vacuum cleaner with the ON/OFF switch and press the switch in direction ON. Make sure the vacuum
cleaner’s air outlet does not get blocked while using the appliance.
8. After use, switch the appliance off again using the ON/OFF switch. Then remove the plug from the cigarette lighter socket.
Never remove the plug by pulling the cable. Store any accessories not being used in a safe place.
Emptying the Dust Collector
1. Switch the vacuum cleaner off and remove the plug from the cigarette lighter socket.
2. Undo the 3 fastening clips by pushing sideways and down. Lift the uppersection of the appliance off the
dust collector and empty it.
3. Remove the permanent filter and clean it by brushing and knocking. Place it back in the motor opening
so that it is seated flush. If the filter is very dirty,it can be washed clean in tepid soap suds.
Make sure that it has dried completely before putting back into the appliance.
Re-Assembly
1. Before reassembling, make sure that the filter is back in position.
Operating the vacuum cleaner without filter could result in irreparable damage to the appliance.
2. Put the upper section of the appliance back on the dust collector.
3. Fasten the 3 fastening clips by hooking onto the dust collector at bottom
Cleaning the Car Vacuum Cleaner
Use a dry or slightly moist cloth to clean the appliance. The ventilation slots can easily be cleaned with a brush.
Do not use chemicals or solvents such as petrol to clean the machine.
Never immerse the machine in water.

Operation:

1.Plug the unit a car cigarette lighter.

2.Open the vacuum cleaner power switch.

3.Insert clean head into brush cleaner hose.

4.when vacuuming, using time as the motor temperature rises will not affect the normal vacuum cleaner use of time; If you have used it for 20 minutes once, you should allow the motor to cool 5 minutes before resuming use.

Note:

1. the machine can not be inserted into the water absorbent.

2. for prolonged use, you should start the car motor.

3. keep the intake pipe flow. Regularly clean the filter cover.

Accessories:

1 x Large Brush Heads

1 x Crevice Head

1 x Nozzle Head

Photos