drinking water purifier/filter with reverse                                 osmosis system                        

Characteristics:

High grade RO membrane separation technology Automatic backward washing function

to extend the RO membrane life span Micorcomputerized, close cycled and automatic purification

eliminate secondary pollution First innovated water over loading and no water protection system

Major technical parameters :

The voltage and frequency of power source :220V/50Hz

Total input power :28 W

Pure water output :50 GPD/ 75 GPD/ 100 GPD (three choices)

Suitable source water pressure :0.1~0.4 Mpa

Permitted environmental temperature :5~38 °C

Notice:

1. Pressure tank have an air vent and do not deflate it .
2. Do not use the disproportional power source instead of voltage rating  .
3. If the system is not in use for a long period of time ,the plug of power source should be pulled out (optional if with pump ),and the inlet water ball valve should be shut to cut off source water .
4. After long term out of service ,when using again should follow the operation as the first time .
5. Careful handing is necessary during shipping ,moving and installation