Specification
- Diameter:16-630mm
- Material:PE63,HDPE80,HDPE100
- ISO
GB/T13663-2000 PE 63/80/100 drainage pipe
The material of tubes is PE63,PE80,PE100 and other PE resin. Their specifications, dimensions and performance meet the requirements of GB/T13663-2000 standard. Their sanitations meet the related regulations of national Health Ministry. The PE pipes have some advantages like good flexibility, corrosion resistance, light weight and excellent impact resistance and so on.
Pipes and pipe fittings can be connected by thermal-fused socket, thermal fusion and electrofusion to fuse them together. The system is safe and reliable, and the cost of construction is low. They can be applied rapidly in engineering areas. To promote PE pipe, meets the guidelines on development of chemical building materials provided by the National Ministry of construction and the State economic and Trade Commission, and fits the development requirements of the people's living standards.
PE63 Pipe specification
Diameter (mm) | Standard size than | ||||
| SDR33 | SDR26 | SDR17.6 | SDR13.6 | SDR11 | |
| Nominal pressure(MPa) | |||||
| PN0.32 | PN0.4 | PN0.6 | PN0.8 | PN1.0 | |
| Thickness | Thickness | Thickness | Thickness | Thickness | |
| 16 | - | - | - | - | 2.3 |
| 20 | - | - | - | 2.3 | 2.3 |
| 25 | - | - | 2.3 | 2.3 | 2.3 |
| 32 | - | - | 2.3 | 2.4 | 2.9 |
| 40 | - | 2.3 | 2.3 | 3.0 | 3.7 |
| 50 | - | 2.3 | 2.9 | 3.7 | 4.6 |
| 63 | 2.3 | 2.5 | 3.6 | 4.7 | 5.8 |
| 75 | 2.3 | 2.9 | 4.3 | 5.6 | 6.8 |
| 90 | 2.8 | 3.5 | 5.1 | 6.7 | 8.2 |
| 110 | 3.4 | 4.2 | 6.3 | 8.1 | 10.0 |
| 125 | 3.9 | 4.8 | 7.1 | 9.2 | 11.4 |
| 140 | 4.3 | 5.4 | 8.0 | 10.3 | 12.7 |
| 160 | 4.9 | 6.2 | 9.1 | 11.8 | 14.6 |
| 180 | 5.5 | 6.9 | 10.2 | 13.3 | 16.4 |
| 200 | 6.2 | 7.7 | 11.4 | 14.7 | 18.2 |
| 225 | 6.9 | 8.6 | 12.8 | 16.6 | 20.5 |
| 250 | 7.7 | 9.6 | 14.2 | 18.4 | 22.7 |
| 280 | 8.6 | 10.7 | 15.9 | 20.6 | 25.4 |
| 315 | 9.7 | 12.1 | 17.9 | 23.3 | 28.6 |
| 355 | 10.9 | 13.6 | 20.1 | 26.1 | 32.2 |
| 400 | 12.3 | 15.3 | 22.7 | 29.4 | 36.3 |
| 450 | 13.8 | 17.2 | 25.5 | 33.1 | 40.9 |
| 500 | 15.3 | 19.1 | 28.3 | 36.8 | 45.4 |
| 560 | 17.2 | 21.4 | 31.7 | 41.2 | 50.8 |
| 630 | 19.3 | 24.1 | 35.7 | 46.3 | 57.2 |
HDPE80 pipe specification
Diameter (mm) | SDR33 | SDR26 | SDR17.6 | SDR13.6 | SDR11 |
| PN(MPa) | |||||
| 0.4 | 0.6 | 0.8 | 1.0 | 1.25 | |
| Thickness | Thickness | Thickness | Thickness | Thickness | |
| 20 | - | - | - | 2.3 | 2.3 |
25 | - | - | 2.0 | 2.3 | 2.3 |
| 32 | - | - | 2.0 | 2.4 | 2.9 |
| 40 | - | 2.0 | 2.3 | 3.0 | 3.7 |
| 50 | 2.0 | 2.0 | 2.8 | 3.7 | 4.6 |
| 63 | 2.0 | 3.0 | 3.6 | 4.7 | 5.8 |
| 75 | 2.3 | 3.6 | 4.3 | 5.6 | 6.8 |
| 90 | 2.8 | 4.3 | 5.1 | 6.7 | 8.2 |
| 110 | 3.4 | 5.3 | 6.3 | 8.1 | 10.0 |
| 125 | 3.8 | 6.0 | 7.1 | 9.2 | 11.4 |
| 140 | 4.3 | 6.7 | 8.0 | 10.3 | 12.7 |
| 160 | 4.9 | 7.6 | 9.5 | 11.8 | 14.6 |
| 180 | 5.5 | 8.6 | 10.2 | 13.3 | 164 |
| 200 | 6.1 | 9.6 | 11.4 | 14.7 | 18.2 |
| 225 | 6.9 | 10.8 | 12.8 | 16.6 | 20.5 |
| 250 | 7.6 | 11.9 | 14.8 | 18.4 | 22.7 |
| 280 | 8.6 | 13.4 | 15.9 | 20.6 | 25.4 |
| 315 | 9.6 | 15.0 | 17.9 | 23.2 | 28.6 |
| 355 | 10.8 | 16.9 | 20.2 | 26.1 | 32.3 |
| 400 | 12.2 | 19.1 | 22.7 | 29.4 | 36.4 |
| 450 | 13.7 | 21.5 | 25.6 | 33.1 | 40.9 |
| 500 | 15.2 | 23.8 | 28.4 | 36.8 | 45.5 |
| 560 | 17.0 | 26.7 | 31.8 | 41.2 | 50.9 |
| 630 | 19.1 | 30.0 | 35.8 | 46.3 | 53.3 |
HDPE100 pipe specification
Diameter (mm) | SDR26 | SDR21 | SDR17.6 | SDR13.6 | SDR11 |
| PN(MPa) | |||||
| 0.6 | 0.8 | 1.0 | 1.25 | 1.6 | |
| Thickness | Thickness | Thickness | Thickness | Thickness | |
| 32 | - | - | - | - | 2.9 |
| 40 | - | - | - | - | 3.7 |
| 50 | - | - | - | - | 4.6 |
| 63 | - | - | - | 4.7 | 5.8 |
| 75 | - | - | 4.3 | 5.6 | 6.8 |
| 90 | - | 4.2 | 5.1 | 6.7 | 8.2 |
| 110 | 4.2 | 5.3 | 6.3 | 8.1 | 10.0 |
| 125 | 4.8 | 6.0 | 7.1 | 9.2 | 11.4 |
| 140 | 5.4 | 6.7 | 8.0 | 10.3 | 12.7 |
| 160 | 6.2 | 7.6 | 9.5 | 11.8 | 14.6 |
| 180 | 6.9 | 8.6 | 10.2 | 13.3 | 16.4 |
| 200 | 7.7 | 9.6 | 11.4 | 14.7 | 18.2 |
| 225 | 8.6 | 10.8 | 12.8 | 16.6 | 20.5 |
| 250 | 9.6 | 11.9 | 14.8 | 18.4 | 22.7 |
| 280 | 10.7 | 13.4 | 15.9 | 20.6 | 25.4 |
| 315 | 12.1 | 15.0 | 17.9 | 23.2 | 28.6 |
| 355 | 13.7 | 16.9 | 20.2 | 26.1 | 32.3 |
| 400 | 15.4 | 19.1 | 22.7 | 29.4 | 36.4 |
| 450 | 17.3 | 21.5 | 25.6 | 33.1 | 40.9 |
| 500 | 19.2 | 23.8 | 28.4 | 36.8 | 45.5 |
| 560 | 21.5 | 26.7 | 31.8 | 41.2 | 50.9 |
| 630 | 24.2 | 30.0 | 35.8 | 46.3 | 57.3 |
Features and advantages
- PE tubes are non-toxic,do not contain heavy metal additives,are against scaling,and do not grow bacteria.They solved the problem of secondary pollution of drinking water.
- Corrosion resistant to much chemical,Eletro-chemical corrosion free.
- I with smooth inner side,extremely low friction coefficient,the flow of medium increases and it has excellent wear resistance.
- Light weight and convenient transportation and installation.
- Unique fused connection,hot melt and docking socking socket-connection technology enable the strength of interface are highter than the pipe body to ensure that the interface is safe and reliable.
- Welding process is simple,construction is convenient,and comprehensive cost is low.
Application field
- Urban and rural water supply pipe
- Drainage pipes
- Chemical liquid conveying pipe
- Tubes for telecommunications
- Drilling tubes
- Mining slurry Transportation pipeline
- Air conditioning cooling water pipline
- Crops irrigation pipeline
- Power Cable protection pipeline
- Oil transportation pipeline
PE tubes
PE fittings