1.Description

Star picket is also known as Y post, star picket, star post, metal picket, steel post, steel picket, fence post, etc.

Main market in Australia, New Zealand and other countries near by Product lin

In cross-section they form a three-painted star,and about 10cm in diameter.One end is pointed so the steel post can be more easily hammered into the ground

and the other end is flat to suit the hammer. Holes are pre-drilled along the length of the post to allow wires to be attached to the picket for fixing to temporary fence,Barrier mesh etc.

2.Specification

Below 1.86 kg/m, the posts are called light duty Y post. And high than 1.86 kg/m, The posts are called heavy duty Y posts

3.Surface Treatment

4.Detail showing

1>Minimum extrusion weight before machining 1.58 kg/m,1.86 kg/m,1.9 kg/m 2.04 kg/m as  requirement.

2>Apply epoxy-asphalt coating(dip or spray) evenly to achieve not less than 60 gr/sqm coverage,remove rough edges and tails ,ensure holes clear.

3>Coating must be allowed sufficient time to dry and cure before containerisation

4>Composition of the epoxy-asphalt coating as follows (50% oil and 50% pitch)

• Dimethyl benzene         40%
• Naphthalene                  45%
• Solvent                           10%
• Epoxy Resin                    3%
• Epoxy curing agent         2%

5.Application

For protective wire mesh fencing of express highway and express railway;

For security fencing of beach farming, fish farming and salt farm;

For security of forestry and forestry source protection;

For isolation and protecting husbandry and water sources;

Fencing posts for gardens, road and houses.

 Packaging :  10pcs/bundle,20bundles or 40bundles/pallet(200pcs or 400pcs/pallet)