wood shaving dryer/ dryer for wood shaving

1 Wet raw materilas goes into the feeding hopper by belt conveyor or bucket elevator, then through the feeders goes into the feed pipe. The feed peipe slppe is greater than the natural inclination of the materials, so that the material can inflowtherotary dryer smoothly.

2 There is one hot airfurnace supply the hot fuel gas for the rotary dryer usually.The fuel can be waste wood, coal, naturla gas, diesel etc.

3 The rotary dryer cyclinder is tilted slightly compared withhorizontal . Materials and hot fule gas into the rotary dryer cilinder from the higher end. During therotation of the cyclinder, the material by gravity goes into the lower end. When the wet material is in the process of moving forward in the rotary dryercylinder nogy, thelifting plates inside the roatary dryer cilinder makes the materialup and down to contact with the hot fuel gas complete. Thus the moisture inside the wet materials isevaporated into water vapour, and finamlly we get the dried materials.

4 There isone high pressure induced draft fan is used to suckout thewater vapour of the rotary dryer during the drying process. Finally the water vapour with some dust goes into thecyclone dust collector. In the cyclong dust collector, the dust is separeted from thewater vapourand falls down from the bottomofthe cyclone dust colletcot. Thewater vapourleaves the cyclong dust collectorfrom thetop pioe of the cylone dust collector, and finally goes intoat mospherer through thechimney.

5. At theend of rotary dryer, using one belt conveyorto transport the dried material into trucks or staorge room direclty.

wood shaving dryer/ dryer for wood shaving  refers to using screw conveyor to continuously add the powder shap wet sawdust into dry pipe.

Description:

Sawdust dryer refers to using scew conveyor to continuously add the powder shap wet sawdust into dry pipe. In conveying and dispersing of high speed heat flow, make wet raw materials moisture evaporate, get powder or granular products drying process. It is mainly made up by air heater, feeder, air flow drying tube, cyclone sepearator, fen etc.

Features:

1. stong drying strength, as the materials in the air flow is high dispersion, particles' total area is the effective area of drying

2. Short drying time.

3. Airflower dryer has features of simple structure, small floor areas, easy to build and maintain.

4. Large handling capacity and high thermal efficiency. When drying togethre with water, thermal efficiency can reach 60%.

Pameter for  wood shaving dryer/ dryer for wood shaving  :

About Us:

 As a professional manufacturer of biomass rotary dryer with CE & ISO certificate in China, we can take responsibility to our every client very seriously.

The rotary dryers use for drying many kinds of materials and finished products, such as the crop straw powders, sawdusts, small wood shavings/chips, animal waste, household waste and so on. The dryers generally applied to the farm straw processing plant, wood working factory, organic fertilizer factory and Chinese medicine factory.

The rotary dryers adopt air inhale device to inhale the hot air from air-heating furnace to the inner of dryer to complete heating change with wet material. According to the different character of materials, we use different type lifting plate and Anti-sticking measures. 

There are multi angle lifting style lifting plate inside of rotary dryer; during drying, the lifting plate will raise the material evenly, which can ensure the material complete heating change with the hot air enough and also ensure the drying efficiency is good.

contact information:

Alice

skype: alice chusongtao

phone:+0086-18353139932