Product Details

Mosaic column emitter type drip irrigation pipe.

Brief Introduction:

The firstly processed labyrinth round dripper is stuck on the pipe and then the hole is made one the water outlet position of the dripper.

Features:

The labyrinth flow path is long, ensuring that the water dripper is even.
High water pressure and long flow path enable the turbulent flow inside the emitters so that the emitters can wash themselves continuously.
The filter square of water dripping entrance is big then the anti-blocking capacity is strengthened.
There can be one, two or four water dripping outlets on each emitter, which greatly lowers the risks of water interception due to the outside blocking.
The dripper is installed before being taken our from the factory which saves labor cost and reduce the investment.
The paving length can reach 300m.
It is hard and can be used in the four seasons.
Compared with others, the suitability and anti-clogging is strong.
The requirement for the water quality is low. Water flow is more steady and longer service life.

Application: It is widely used in desert, city greening, economic crops, greenhouse, garden and full buried type irrigation.

Sizes:

Outside diameter(mm)

Thickness(mm)

Rated working pressure(Mpa)

Water discharge rate(L/H)

Water outlet space(mm)

Filter mesh quantity(mesh)

Max. paving length

Even degree(%)

Each roll length(m)

Φ8

Φ10

Φ12

Φ16

Φ20

Φ25

Φ30

0.5

1.2

0.1

≥200

120

300

≥85

≤500

machine, final product and application

Relative Products

FAQ

1.Q: Are you manufacture or trade company?

A:We are manufacture specialized in drip irrigation more than 20 years; Our produces have CE and ISO certification.

2.Q: How can I get the samples?
A:If you need some samples to test, we can make as per your request .You should pay for the transportation freight of samples and our samples cost, while the samples cost can be refundable after you place the order if the amount meets our requirement.

3.Q:How much the transportation freight of samples?
A:The freight depends on the weight and packing size and your area.

4.Q:How long can I expect to get the sample?
A:The samples will be ready for delivery within one week. The samples will be sent via express and arrive in 4-7 days.

5.Q:Can we have our Logo or company name to be printed on your products or package?
A:Sure.Your Logo can be put on your products by Hot Stamping,Printing,Embossing,UV Coating,Silk-screen Printing or Sticker.

6.Q:How to order?
A: Please send us your purchase order by Email or you can ask us to send you a proforma invoice for your order. We need to know the following information for your order.
   1) Product information-Quantity, Specification (Size, Material, Technological and Packing requirements etc.)
   2) Delivery time required.
   3) Shipping information-Company name, Street address, Phone &Fax number, Destination sea port.
   4) Forwarder's contact details if there's any in China.