Product Details

PE irrigation pipe , drip tape for agriculture drip irrigation

Product Description

Material	Plastic: PE according to the customers' requirements
Dimension	According to the customers' drawings
Performance requirements	According to the customers' requirements (Tensile strength, elongation, compression set, high temperature resistance, low temperature resistance, ozone resistance, density and so on)
Plastic parts color	Black,red, any other colors as per Customers’requirement or as per RAL code. quick coupling
Brief introduction	Turbulent flow resistance even wall thickness
Applications	Dripping tapes The unique large aperture inlet, than with the aperture of the same type air valve. In and out of the gas channel of aerodynamic performance is very excellent.
Rapid Development line	A. From drawing, new tool design to mold support and samples. B. Prototype mold, usually in 7 days; C. Mass production mold, usually in 2~3 weeks.

Internal insert/patch/labyrinth drip irrigation belt cylindrical

drip irrigation belt

Drip irrigation belt is the use of plastic piping (drip line guide) will be on the water by about 10 mm diameter capillary orifice or head to the local irrigation crops root. Is through a discharge orifice is very small the drops or drip irrigation belt, put the drops of water drop by drop and slowly in the vicinity of crop root in the soil

Now drip irrigation is a method of precision irrigation with low pressure pipeline system, the water directly into the field, after installed on the capillary drip head, orifice, or drip irrigation machine, such as the water drop by drop evenly and slowly drip into the crop root zone nearby soil, crop root soil often maintain appropriate humidity, the most developed area of soil water, fertilizer, gas, heat, microbial activity, always in good condition, and to create favorable conditions for high and stable yield crop. Drip irrigation belt can be divided into drip irrigation belt and patch type labyrinth drip irrigation belt.

Labyrinth type drip irrigation hose

Labyrinth drip irrigation belt is in the manufacturing of thin wall pipe at the same time, in the side of the tube or the middle bounding out of drip irrigation with various shapes of flow channel.

Labyrinth drip irrigation belt parameters:

Specificaion	inside diameter (mm)	wall thickness (mm)	Drops of hole spacing (mm)	Work flow(L/h)	Work pressure(m*3)	Length
200-2.5	8,16,20	0.18	200	2.5	5-10	2000
300-1.8	8,16,20	0.18	300	1.8 2.1
300-2.1
300-2.4				2.4
300-2.6				2.6 2.8
300-2.8
300-3.2				3.2
400-1.8	8,16,20	0.18	400	1.8 2.5
400-2.5

The function of drip irrigation belt

It is currently arid region one of the most effective way of water-saving irrigation, the water utilization rate can reach 95%. Drip irrigation has higher water production effect, and can combine fertilizer at the same time, improve the fertilizer effect more than double. Applicable ornamental fruits, vegetables, cash crops and greenhouse irrigation in arid places can also be used for field crop irrigation. Its deficiency is drop head easy fouling and plugging, thus should make strict filtering processing for the water. At present, the domestic equipment has been basically pass, conditional drip irrigation area should be positive development

1, used in the greenhouse, greenhouse crop cultivation, reduce plant diseases and insect pests, save fertilizers, pesticides, improve the economic benefit.

2, used in the greenhouse, greenhouse crop cultivation, reduce plant diseases and insect pests, save fertilizers, pesticides, improve the economic benefit.

3, Suitable for cotton, a variety of field crops, such as Chinese herbal medicine, watermelon, vegetables in open field, improve the mechanization planting.

4, Drip irrigation belt can be bent around the ridge and laid, easy to operate.

inner inlay drip irrigation pipe

Within the set type drip irrigation pipe is an important irrigation, drip irrigation system is in accordance with the requirements for crop water requirement, through the low pressure pipe system and installation on the capillary water, the water drop by drop, and crops needed nutrients evenly and slowly drip into the crop root zone soil. Drip irrigation does not destroy soil structure.

Within the set type drip irrigation pipe performance parameters:

1. Using embedded labyrinth throttle type and embedded labyrinth compensating drop head, flow through a turbulent state, self-cleaning performance and anti-clogging ability strong, filtering level relaxation to 80 mesh;

2 .constant pressure flow diameter compensator, discharge uniformity is 95% or more;

3. Using new materials, high strength, corrosion resistance, anti-aging;

4. 1.5 L/h ~ 10 L/h eight traffic can choose according to different requirements;

16×0.2×200	16×0.3×150	16×0.4×150	16×0.6×200
16×0.2×300	16×0.3×200	16×0.4×200	16×0.6×300
16×0.2×400	16×0.3×300	16×0.4×300	16×0.6×400
16×0.2×500	16×0.3×400	16×0.4×400	16×0.6×500
16×0.8×300	16×0.3×500	16×0.4×500	16×0.6×1000
New products (buried drip line)	(distance is adjustable, the flow is divided into 2.7 L and 1.38 L two)

Suitable conditions:

1, Suitable for water resources and the lack of labor area of field crops, orchards, green trees.

2, Widely used in the greenhouse, greenhouse planting and greening projects, open.

Notes :

1. Is drip irrigation pipe and drop head easy to jam, water demand is higher, so the filter must be installed; 2. Is drip irrigation field microclimate regulation, not suitable for irrigation, frozen in vegetable crops cannot use topdressing manure drip irrigation system.

3. Drip irrigation investment is high, want to consider the economic benefits of crops;

4. Note that the compaction compaction mulch drip irrigation belt, make the mulch drip irrigation belt press close to, as far as possible between the mulch and drip irrigation belt don't have space. Avoid by droplets formed by the sun. Flat land before sowing, reduce land more pit depression phenomenon. Miscellaneous stone weeds in order to prevent lumps membrane, causing the water vapor water form the lens effect under mulch, burns drip irrigation belt. When laying will drip irrigation belt to carry on the ground, to avoid burns.

micro-spraying hose

Micro spray zone is also called the perforated pipe, sprinkler, sprinkler irrigation and micro irrigation pipe, is on the plastic hose can be crushed by mechanical or laser direct small holes, water for irrigation or micro irrigation water-saving irrigation equipment. Will be three drainage holes in each group, five drainage holes or seven drainage holes, and more oscular micro spray directly laid on the ground, direct the flow of water in the air can form the similar drizzle micro spray irrigation effect. To each group of a single water drainage holes or double oscular laid under mulch, the flow can be formed under the cover of mulch drip irrigation effect. Existing three major categories, dozens of micro spray belt, can satisfy the demand of all kinds of dry, a customized product and user requirements can be installed.

Micro spray with less materials, installation, collection and transportation are more convenient, is the various irrigation systems in one of the lowest price. The deficiency is the strength of the plastic thin wall tube materials is low, easy to damage, easy to aging, the service life of the general type for 1 ~ 2 years. Investment is the least in water-saving irrigation methods. Sprinkler irrigation is used in the ground or sloping fields of fruit trees, tea plantations, litchi, banana, nursery, daejeon. And greenhouse cultivation of crops watered flowers, has the production. Save fertilizer. Save water. Time-saving benefits.

Features:

1. Port and drip hole a whole vacuum hot-pressing forming, good adhesion, high precision manufacturing .

2. More than turbulent state water, strong anti-clogging ability .

3. Inclined osculum flow design, the water evenly, can reach more than 85%, lay up to 80 m .

4. Light weight, easy installation and management, artificial installation cost is low.

Application:

1. Used in the greenhouse, greenhouse crop cultivation, reduce plant diseases and insect pests, save chemical fertilizers, improve the economic benefit .

2. For the orchard irrigation, can effectively increase the yield, improve fruit quality, to effectively control the weeds .

3. Suitable for cotton, a variety of field crops, such as Chinese herbal medicine, watermelon, vegetables in open field, improve the mechanization planting .

4. Micro spray belt can be bent around the ridge and laid, easy to operate .

PE drip irrigation pipe

The replacement of the PE pipes is PVC drinking water pipe. PE material due to its high strength, high temperature resistant, corrosion resistant, non-toxic characteristics, are widely used in feed pipe manufacturing. Because it will not rust, so, is an ideal pipe to replace ordinary iron feed pipe

The current PE drip irrigation pipe is an important irrigation, drip irrigation system is in accordance with requirements of the crop water requirement, through the low pressure pipe system and installation on the capillary water, the water drop by drop, and crops needed nutrients evenly and slowly drip into the crop root zone soil. Drip irrigation does not destroy soil structure

Main Pro Technical Parameter :

2 .constant pressure flow diameter compensator, discharge uniformity is 95% or higher ;

3. Using new materials, high strength, corrosion resistance, anti-aging ;

4.1.5L/h~10 L/h Eight kinds of flow can choose according to different requirements ;

5.0.3mm~2mm A variety of wall thickness to meet the need of different irrigation environment. Drip irrigation pipe structure

Conditions

1, Suitable for water resources and the lack of labor area of field crops, orchards, green trees.

2, It is widely used in greenhouse, greenhouse ,

Specification	Thickness (mm)	Pressure	Flow	(m/piece)
16	1.0+0.2	0.4Mpa		1000
20	1.6+0.3	0.4		500
25	1.8+0.3	0.4		300
32	2.0+0.4	0.4		200
40	2.3+0.4	0.4		300
50	2.9+0.4	0.4		200
63	3.5+0.6	0.4		100