Name: Industry Heating Shoes Dryer
Brand: HUAYU
Availability: InStock

Product Details

Industry Heating Shoes Dryer

Industry Automatic Heating Boot Rack

Product Description

Automatic Heating Boot Dryer is kind of good boot or shoes dryer.

Main Features:

1. Advanced design and technology;

2. High quality guarantee;

3. Long service life;

4. High automatic degree;

5. Easy operation and maintenance;

6. Labor and energy saving;

Usage environment

Environment temperature: -10℃~+50℃

Storage temperature: -25℃~+70℃

RH: less than 90%

Atmospheric pressure: 86kPa~106kPa

The shelf can't be used in environment which exist explosive and dangerous medium, causticity metal, air of destructing insulation and electric medium and exist steam and mold.

Technical parameters

Materials:304 stainless steel;

Working power: Voltage: 220V Or Customized.

Rated frequency:50Hz, allowable deviation: -5%~+5%.

Power:2.75kw

Dimension :Length*width*height: 1500mm*500mm*1500mm.

Influence of temperature: boots dryer should be equipped in -10℃~ +55℃, should not with large temperature change.

>Ask For Quotation<<" href="http://message.china.cn/msgsend/contact.htm?action=contact_action&domain=1&id=60463173182&id_f=IDX1xczIJO1FhZVQlwkbRln94OP__SVHQORZMH69lWmSjS5AS66eTXVSxm7EKO5Ek1Vj&mloca=main_en_detail&tracelog=tracedetailfeedback&umidToken=Bcc05f2feb2d68d91f04ef6ee72417ba5" target="_blank">>>Ask For Quotation<<

Installation procedure and usage instruction

Open package and put in position

Plug in power and make sure the LCD normal

You can set time and automatically open and close fan power

The controllable temperature switch is equipped in behind of the shelf, temperature adjustable according to requirements.

Insure connection right

Below are instruction for switch

No.	Button	Content
1	Press "time setting" button	It is showing the first time to operate
2	Press "hour/minute proofread "button	Set up the open time
3	Press"week proofread "button	Set this time work in someday in this week,that is working model
4	Press“time setting" button	It is showing the first time to close
5	Press "hour/minute proofread "button	Set up the closed time
6	Press" week proofread"button	It is showing "working model".
7	Repeat No.1~6	Set up time for second open and close. Set up third open and close. (if no need to set time , make it show"----:----")
8	Press "clock"button	Finish setting time and return the primary position
9	Press"manual/automatic"button	Let the "↓"point to the open or closed and adjust to "automatic" condition

If set wrong or cancel, you should press"cancel/recover"button, it will show"------:-----" press once more, it will recover the primary setting.