Liquid bottle dispenser is ideal for mobile locations or home users who can't or don't want to direct plumb. The Bottled Water Dispensing System will deliver the water under pressure to an individual drinking water faucet, the water inlet of a refrigerator for the ice-maker and chilled drinking water tap, and to certain commercial coffee / tea brewers.

Singflo pump included: 
•Suction wand and hose assembly.
•Pump module with On/Off switch.
•6 foot cord with plug.
•20 feet of 1/4" discharge tube
•Universal seal cap: Fits any 3, 5, and 6 gallon plastic water bottle.
•Installation and maintenance instructions.

Specifications:
   Max. Flow Rate: 1.0 gpm (3.8 lpm) 
   Max. Pressure: 40 psi (2.8 bar) 
   Dimensions: 3.0 H x 5.5 W x 7.5 D inches (7.6 x 14.0 x 19.0 cm) 
   Voltage 115 or 230 V AC 12 V DC 
   Amp Draw: 12 Volt 3.0 Amps. Max. 
   115 Volt   0.5 Amps. Max. 
   230 Volt   0.25 Amps. Max. 
   Cycles: AC models 50/60 Hz 
   Weight: 2.9 kg(5.6 net lbs)

Using methos.

1.Mount the system in a convenient location with access to power and space for the bottled water.

2.Install the suction tube into the water bottle

3.Insert the outlet tubing(20' provided) into the connector

4.Route the tubing to your refrigerator,brewer,or tap

5.Plug in the dispensing system

6.Press the switch on,and it's ready to use

Technical datas: