Castor oil machine introduction
ADVANTAGES:
1.Saving labor:
it can save 60% labor for equal output and 40% labor cost per day for one or two people are able to make production.
2.Widely-range:
it can be used to completely press more than 20 kinds of oil crops, such as peanuts, sesame,
vegetable seeds, soybean, oil sunflower and flax by third levels for one time.
3.Pure oil quality:
the bag filter is used to remove residue so as to ensure the pure oil quality and meet the
standard of health quarantine .
4.Small land-using:
an area of 10-20 m2 workshop can meet the need.
5. Using vacuum filter, it is able to simply filter the crude oil after pressing
6. It is able to save labour, about 60% . One or two person is for per machine
7. Protection the environment, comparing with the traditional oil press machine, it is about to
meet the standard of green environment.
8. Low investment, high profit.
Raw Material | Oil Yield (%) | Cake thickness (mm) | Dry cake residual oil rate (%) |
Sesame | 44-47% | 1.0-1.5 | 6 |
Peanut | 35-45% | 0.5-2.0 | 6 |
Rape seeds | 30-38% | 0.8-1.8 | 6 |
Sunflower seeds | 36-42% | 1.0-1.5 | 6 |
Soybean | 10-16% | 0.8-1.5 | 6 |
Cotton seeds | 10-14% | 1.0-2.0 | 6 |
walnut | 42-52% | 0.8-1.5 | 6 |
corn embryo | 25-35% | 0.8-2.0 | 6 |
flax seeds | 35-38% | 1.0-1.8 | 6 |
castor seeds | 35-42% | 1.0-1.8 | 6 |
tea-seeds | 28-35% | 1.0-2.0 | 6 |
OPERATING PRINCIPLE:
1.When oil press is on work, material enters the extruding chamber from the hopper and then
moves forwards by the rotating pressing screw and is pressed.
2.Under high temperature condition in the chamber, there is quite strong friction among press
screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them
outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screws rotating, causing every
particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during
manufacturing because of helping protein change property, damage colloid, increase plasticity,
decrease oils elasticity, resulting in high oil.
Attn: Tom
Website:
Phone: +86-15515901135
Skype: Luyachao819
Whatsapp/viber/tango: +8615515901135
If you want to learn more or purchase equipments, please contact me.