Qie 100~600kg/hr automatic fine quality oil expeller for palm kernel 6YL series

 

MAIN SPARE PARTS:

worm, squeezing head, worm shaft, cage bar, heater ring, cake outlet, vacuum filter.

HOW TO OPERATE OIL PRESS MACHINE:

1. Prepare the seeds;

2. Adjust the machine, such as electricity, heating (optional);

3. Start the machine, putting seeds into the feeder;

4. Seed into the screw bolt , begin to press;

5. The crude oil comes out of the squeezing bolt, then flow into the board;

6. Go into the vacuum filter, using it for filtration;

7. After filtration, the oil comes out from the bottom of pipe.

SCREW OIL PRESS WORKING PRINCIPLE OF 6YL SERIES:

1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.

2.Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.

3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.

4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.

5.Meanwhile, particles adjacent the screw will rotate along with screws rotating, causing every particle inside the chamber to possess different speed.

6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oils elasticity, resulting in high oil.

DETAILED TECHNICAL PARAMETERS FOR 6YL SERIES EXPELLER: