Product Name: Sanray RFID Module M2210 Long Range Module Impinj Chip Module
Multi-tag Reading: ≥400 tags/s
M2210 UHF RFID reader module is a high-performance reader/writer designed for high challenging RFID application environment.
The modules have been tested for nonstop running, and results showed that our module can work ceaselessly for 180 days.
The stability and reliability can perfectly meet our customers’ application requirements.
This product is suitable for RFID intensive and more challenging environment and required a higher reading/writing performance, such as warehousing, logistics, production line management, etc..
Product Advantages:
1. Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity and the high performance makes this module more suitable for harsh application environment.
2. High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuous.
3. Remarkable performance with 8dbi RF antenna, can achieve a reading distance over 10m per single tag.
4. Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.
5. Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
6. Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.
7. The use of carrier wave cancellation technology makes the tag reading more accurate and the reading scope wider.
8. The smallest module volume (56.5*36.0*7.8 MM) in the same field and supply power of 3.7V--5V, it is especially suitable for handsets and other mobile devices.
9. Enhance noise suppression for reliable data capture.
10. High precision return signal strength (RSSI).
We have one port/four port reader/writer Impinj R500/R2000 modules available. Pls feel free to contact us for more information and catalogue/datasheet.
Skype: sanray.nicole
Technical Specifications
NO. | Name | Parameters |
1 | Working Voltage | DC 3.7~5V |
2 | Working Current | 1.5A |
3 | Standby Current | ≤50mA |
4 | Sleep Current | ≤1mA |
5 | Working Temperature | -25 -- +65°C |
6 | Working Humidity | ≤95%(+25°C) |
7 | Storage Temperature | -40~+80°C |
8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
9 | Working Frequency | 840---960 MHz |
10 | Supporting Working Areas | China 1,China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan Korea Malaysia Taiwan |
11 | RF IC | Impinj R2000 |
12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
13 | Output Power Flatness | ±0.2dBm |
14 | Receiving Sensitivity | -82dBm |
15 | RF Port Standing Wave | ≤1.5 |
16 | Reading Distance | ≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
17 | Multi-tag Reading | ≥400 tags/s |
18 | Antenna Interface Amount | one(MMCX) |
19 | Interface Communication Rate | 115200bps |
20 | Working Temprature Detection | support |
21 | Intensive Read/Write Mode DRM | support |
22 | Antenna Connection Protection | support |
23 | RSSI | support |
24 | LED | Red light (power indicator ) |
25 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
26 | Dimension | 56.5*36.0*7.8 MM |
Interface Definition
Pin NO. | Name | Type | Description |
1 | UART_TX | I/O | TTL UART Transmit |
2 | UART_RX | I/O | TTL UART Receive |
3 | GPIO3 | I/O | Output |
4 | GPIO2 | I/O | Output |
5 | GPIO1 | I/O | Output |
6 | PWREN_MODULE | I/O | When Pull Down This Pin to Ground,The Module Enter Sleeping Mode. |
7 | GND | Ground | Ground |
8 | |||
9 | VCC | Power | DC 3.7V to 5V Power Input. |
10 |
Note: 10pin connector, 1mm pitch.
We also have different kinds of UHF RFID devices, such as modules, readers, antennas, inlays, metal tags, etc.. Pls feel free to contact us for datasheet, catalogue or price. Hope we can be of assistance and provide you our best products and solutions.