Low noise disc type 1000kg/h wood shaving machine for horse

 Introduction OF wood shaving machine for horse:

wood shaving machine for horse is worked by diesel engine, with two wheels ,can be moved by tractor here and there. So the moible wood shaving machine can work everywhere to cut wood,log,tree branch,wood board,plywood into shavings,convenient,high efficiency.

Worling principle OF wood shaving machine for horse:

1.Put the raw materials into the feeding hole;

2.Cut the materials by the cutters, and then put them into the pulverizing room;

3.Strike and crush them by the hammer and shear knife in high-speed revolution;

4.Send out the finished products through the screen by wind power;

5.The particles size can be adjusted by the size of the blades and mesh aperture.

Advantage fo the wood shaving machine for horse:

1.The wood waste crusher can process logs, branches, plate edges into wood shavings. 

2.Produced shavings are as the same as furniture factory production of wood shavings. 

3.Automatic self-feeding equipment, has greatly increased the production speed, it also saves time and manpower.

The main data  OF wood shaving machine for horse:

Working process OF wood shaving machine for horse

Inlet adopts automatic feeding device, the material comet into the machine through the feeding port ,
after the blade section in the interior of the machine, and then enter the screen.
Finally it will produce uniform particle size, the thickness can be adjusted automatically.
It is used to make wood shavings.
The different size of final product can be adjusted by tuning the cutter and changing the sieve.
The raw material gets into the machine from feeding port, through the cutter to the crushing room,under the effect of the mutual striking hammers, the material is being crushed.
The wood shvings is the same as the ones from furniture factory.

Finish products OF wood shaving machine for horse