Large capacity with CE ISO biomass wood sawdust charcoal carbonization furnace

Sawdust charcoal carbonization stove ,as the name suggests,is the equipment mainly used for carbonizing sawdust.

Sawdust is transferred to the furnace by screw conveyor,after 5-7 minutes’s carbonization. Sawdust charcoal powder will be screwed out with high efficiency.

The machine can change the sawdust to the charcoal powder directly.final products can be used for shisha charcoal making,coal ball making,firework making.charcoal briquette extruding,mosquito repellent incense producing, activated carbon manufacturing and used in clinical at the same time.Compares to this best seller in our company now.

Raw material of charcoal carbonization stove:

Raw material of this sawdust charcoal carbonization stove

sawdust, wood branches, wood, wood residues, rice husk, sunflower shell, peanut shell, corn stalk, straw, bamboo, cotton stalk, coconut shell, olive, furfural dregs, bagasse, corncob, corn stalk and any other agricultural waste.

Material details

size is better 3-5 mm, the moisture is 8-12%, if not satisfy this, we need the crusher and dryer. 

How to make the charcoal briquette by using the charcoal powder ?

1.crushing  the raw material first,the raw material size is blow 3mm.

2.drying  the powder ,let the material moisture reach 8-12%.

3.carbonizing the mateial into charcoal powder.

4.last,using the charcoal powder  to make charcoal stick briquette ,charcoal ball ,or shisha briquette.

charcoal briquette machine:

charcoal ball briquette machine

shisha charcoal machine

production line:

Structure of charcoal carbonization stove:

And this sawdust charcoal carbonization stove consists of heating parts, carbonizing parts, cooling parts, gas recycle parts, smoking purification parts, and controling parts

heating parts includes three heating room (for heating the stove), furnace body and heat keeping layer (it is made of the heat insulating material, used for keep the heating) and the draught fan .

carbonizing parts: consist of four carbonizing tubes, Both of them are made of the heat resistance thermal steel, under the drive of the machine, the sawdust will be delivery to the tube1, when the sawdust reach to the end of the tube1,it will turn around to the tubes2, and so on,  after four tubes carbonization, the sawdust will become charcoal powder

gas recycle part: When during the process of carbonizing, there will be some smoke.( can be burning) the smoke can return to the furnace through tube for purifying, after purification , the gas recycle tubes can be flow into the heating room of the main furnace for heating the machine again,

Smoking purification parts  ( in this machine, there are  two purification  tank, the first one to purify the smoking ( can not burning ), and the other one are used to purify the gas smoking when the working process, The smoking through the purification system will become water vapor, and it will not pollute the air.

cooling parts, in the back side of the machine, there is one tube for cooling the hot charcoal powder, so we can get the charcoal powder directly 

controling parts, the whole machine we will equipped one electrical control box to control the three electrical motors.

The main parameter of charcoal carbonization stove :