Our main products- complete automatic farming equipment for poultry

• Pan feeding system
• Nipple drinking system
• Feeding filling line and feed transport auger
• Hot galvanized or fiberglass feed silo
• Raw plastic or cast iron floor slats
• Ventilation fan, cooling pad and air inlet system
• Heater and sprayer system
• Environment control system

Pan feeding system consists of

1. Feeding system 2) delivery system   3) feeding storage system 4) control system

1, Feeding system

Feed pan is the core of feeding system. Feed in the hopper is delivered by the motor, through delivery pipe to fulfill feed pans one by one. When all feed pan is full of feed, control box will stop the motor from working; when feed in the feed pan is eaten up, control box will start the motor working again.

Motor:

High quality special driving reduction motor:           

Taiwan motor with overload protection of ip55

Power: 0.75kw voltage: 380v, frenquency:50hz, 3phases

Transmission speed: 450kg/h

Hopper:

Bin volume: 120L, material: hot-dip galvanized sheet

material thickness: 1mm

Feed pad

Auger& Delivery Pipe:

Imported from South Africa, with 450kg/h         Hot galvanized steel with zinc coating

delivery ability                                                   275g/sq.m

                                                                         Diameter of conveying pipe: 45mm

                                                                         (4-pan/3m, 3pan/3m)

2, Delivery system

The function of delivery system is to transmit the feed outside shed to the hopper of feeding system inside, control system indicates delivery system to work automatically.

3, Feed storage system(silo)

Feed of poultry raising farm is stored in the silo, so as to save large account of feed, and also to ensure the good condition of feed. Different specifications of silos are alternative to choose according to the daily consumption and the size of silo. Materials of silo consist of galvanized sheet and glass fiber reinforced plastic.

4, Electric Control system

Control box control the whole system. The control box works sensitively and steadily is extremely important, sensitivity and steady are the base of choosing electronic components. In order to avoid unnecessary waste.

Feed sensor can be installed in the feed pan. when there is lack of feed, drive motor will start and deliver feed. When is full of feed, drive motor will stop. It can be also m=installed at the bottom of hopper and the function will be opposite with the case above.