Name: new 2016 machine Calcium Hydroxide Production Line price
Brand: Dewo
Availability: InStock

Product Details

Product Description

Calcium Hydroxide Production Line/ Slaked Lime Production Line refers to calcinations of Quicklime into Calcium Oxide, and then slakes the selected Calcium Oxide and water based on the ratio of 1: (3 ~ 3.5). After generating Calcium Hydroxide-water mixture, then in the process of purification, separation, deslagging, centrifugal dehydration, drying under the temperature of 150~300℃, rescreening powders more than 120 mesh. Finally, we will get high quality calcium hydroxide whose chemical formula is CaCO3→CaO+CO2↑CaO+H2O→Ca (OH) 2.

Features:

1. High quality and capacity;
2. High auto control;
3. Environment friendly;
4. Low power consumption;
5. Reasonable and experienced onsite service;
6. Long life cycle of wear parts.

TECHNICAL DATA:

1. Bucket Elevator

Model Size	TD250 (mm)	TH250 (mm)	TD315 (mm)	TH315 (mm)
Length	904	1050	1260	1400
Width	504	500	700	625
Discharge Size	375	345	499	475
Model Selection	GF-4.5T/6T		GF-(10T-20T)

2. Slaking Machine

Equipment Model	Quantity (pcs)	Power(kW)	Output(t/h)	Slaking Time(h)	Slaking Machine Model
GF-4.5t	1	7.5x2	≥4.5	0.8	GF-4.5T-XHQ
GF- 6t	2	7.5+11	≥6	0.8	GF-XHQD-I,GF-XHQD-II
GF-10t	3	7.5x2+11+11	≥10	0.9	GF-XHQD-I,GF-XHQD-II, GF-XHQD-III
GF-15t	3	11x2+11x2+11x2	≥15	0.99	GF-XHQS-I,GF-XHQS-II, GF-XHQS-III
GF-20t	3	11x2+11x2+11x2	≥20	0.74	GF-XHQS-I,GF-XHQS-II, GF-XHQS-III

3. Powder Concentrator

Model	Fineness (Mesh)	Motor Power(kW)	Fan Power (kW)	Capacity (T/H)
GF-XFJ-I	150-325	5.5	30	3-6
GF-XFJ-II	150-325	15	37	6-8
GF-XFJ-III	150-325	18.5	45	8-12
GF-XFJ-IV	≥325	30	75	12-18
GF-XFJ-V	≥325	37	90	17-23

4. Auxiliary conveying devices Air Chute

Model	Conveying capacity(m3/h)	Air Required(m³/min/m)	Air Pressure(KPa)
XZ250	56	0.375-0.5	4~5.5
XZ300	85	0.45-0.6
XZ350	114	0.525-0.7
XZ400	228	0.6-0.8

5. Screw Conveyer

Model	Screw Dia. (mm)	Screw Pitch(mm)	Reduction Ratio	Conveying Capacity(m3/h)
LS 200	219	240	17	40
LS 250	273	150	87	8
			71	10
			47	15
			35	21
LS 300	325	200	35	30

Factory show

Dewo Service

Our service
Dewo can provide turkey service for customers, such as engineering consultation, engineering design, equipment manufacturing, packing & transportation, installation & commissioning personnel training etc.

About Spare Parts
Dewo Machinery will be dedicated to provide our customers with genuine spare parts with high quality. With our technological advice, the life cycle of your machine can be prolonged and sustained significantly with high effectiveness.

About Training
Dewo machinery could offer excellent facilities and comfortable environment and training services to different customers. The training should include product training, safety training, operation training, maintenance know-how, technical know-how training, and regulations training, etc. All of the training is customized to fulfill every customer’s expectations. Training programs can be conducted in our workshop, or at customer’s site.

About Installation and Commissioning
Dewo are able to guide the overall installation of whole set production line, including crushing production line and cement equipment production line, etc., which will allow you to start the normal operation of equipment immediately. After installation,we will make inspection of the whole machine commissioning and operation condition and provide you testing data report of installation.

Product Description

Factory show

Dewo Service

FAQ