Specifications

Coal flotation machine:
1.large air-absorption capacity
2.low energy consumption
3.easy operation and installation

Features of Coal Flotation Machine:

1).Large inspiratory capacity, low power consumption.
2).It does not need any auxiliary equipment as very slot forms the flotation circuit independently by setting inspiration, sucking pulp and flotation as a whole.
3).Reasonable pulp circulation, which can minimize precipitation of coarse sand 
4).With automatic control equipment, making it easily to do adjustment.

 

Coal Flotation Machine Introduction:

Flotation machine is used to separate non-ferrous metals, ferrous metals, precious metals, non-metallic minerals and chemical raw materials, recycle the useful minerals. The device has the following characteristics: the giant inspiratory volume, low power consumption. Each slot has three features, that’s inhale, absorb the pulp and flotation. It’s automatic flotation circuit; there is no need of any auxiliary equipment. The configuration is horizontal, which can ease the changes of process. Slurry circulation is reasonable; it can reduce the coarse sand deposits to the greatest degree. With pulp surface-controlled device, it’s convenient to adjust.

Flotation Machine working principle:

(1) After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.

 

(2) When the impeller of the coal flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.

 

(3) As a result of the cenrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the material particle and forms mineralized discharged by the scraping tool. Finally, clean material is produced by this coal flotation machine.

 

(4) The particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.

 

(5) The left pulp that are not sucked by the impeller enters intor the third tank after going through the process of the first tank, thus, coal flotation machine runs in cycle and discharges ore pulp through the tailing box of the coal flotation machine.

 

 Technical Parameters: