ultrafine powder mill for limestone grinding used in used in desulphurization process
Introduction of Yuhong Ultarfine powder mill:
HGM series Ultrafine Mill from Sweden advanced mill industry technology, in view of the current domestic mill industry development trend and market demand situation, professional on superfine power processing research and development of a new type of grinding equipment. Mainly applied to calcite, chalk, calcium carbonate, dolomite. Kaolin, bentonite, mica, talc, magnesite,Illite,Leaf Lashi, vermiculite, sepiolite, palygorskite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphorus ore, ore of potassium, pumice humidity is less than 6%, Mohs hardness below 9 non flammable and explosive of non metal material.
Features of Yuhong Ultarfine powder mill:
1. Low investment costs. It has lower investment cost, shorter recovery cycles.
2. High output. It has more than 45% of high yield than the jet mill and mixing mill with the same product fineness and power consumption.
3. Long service life. All wearing parts are made of high wear-resistant materials.
4. Safe and reliable operation, better sealing performance.
5. The final products size is extensive, from 325mesh to 2500mesh
6. Energy saving &little pollution
Working principle of Yuhong Ultarfine powder mill:
The material in the Silo will fall down into the Feeding tube evenly through the Vibrating Feeder, and then fall onto the upper scattering plate, after that will scatter on the gap between the roller and ring. The material into the inner wall of the rollers will be reground, and then fall down onto the lower scattering plate. And the fine powder conforms to the standard will be discharged into the Dispersive Twin-pipe Cyclone Separator, and then be discharged. And the massiveness will enter the grinding wall to be reground. The air current with the dust will enter into the lower part of the Pulse Bag Dust Catcher, and then be discharged through the Rotational Discharging Device after filtering dust.