Specifications

biomass dryer:
1.ISO9001:2000;
2.Volume:2.26-147.8m3;
3.Dry metallic nonmetallic mineral;
4.Dry Wood chip.sawdust

Used for Wood pellet fully automatic biomass dryer !

 

 

 

The wood Biomass Dryer is a type of  wood dryeremployed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas.

 

 

The wood Biomass Dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern. In some cases, a combination of direct-indirect heated rotary dryers are also available to improve the overall efficiency.

Brief Introduction Of  wood Biomass Dryer

wood Biomass Dryer is suitale to dry metallic and nonmetallic mineral, clay in cement industrial and coal slime in coal mine,etc. Rotary dryer can be widely used to dry various materials, and it is simple to be operated.

 

Applications Of The wood Biomass Dryer

wood  Biomass Dryer have many applications but are most commonly seen in the mineral industry for drying sands, limestone, stones and soil, ores, fertilizers, wood chips, wood pellete,coal, iron sulphate, filter cakes, sewage sludge, etc

 

Drum or Shell Variations Of The wood Biomass Dryer

A wood  Biomass Dryer can consist of a single shell or many, though any more than three drums is not usually necessary. Multiple drums can reduce the amount of space that the equipment consumes. Multi-shell dryers consist of several concentric tubes. Multiple shells allow the dryer to be utilized in a more compact space. The drums are often heated directly by oil or gas burners. The addition of a combustion chamber on the entry end helps ensure efficient fuel usage, and that homogenous drying air temperatures. As the material moves through the rotating drum is heated and moisture released. Some dryers also offer the option to cool, clean, shred, and/or separate the dried material.

  Components Of The wood Biomass Dryer  

wood Biomass Dryer is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device,gear cover, etc.(Optional auxiliary equipment includes combustion chamber,feeder

• and discharging device,and dust collection equipment).
• Rotary drier manufactured by us adopts new lifting plate,which is of functions like guiding,current-sharing,and material raising.
• The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency.
• Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.

 

Combined Processes Of The wood Biomass Dryer

Along with Biomass Dryer have the ability to increase their economy by combining other process needs with drying. Other processes that can be combined with drying are

• Cooling
• Cleaning
• Shredding
• Separating

Spec./m (Dia.×Length)	Shell Cubage (m³)	Capacity (t/h)	Installation Obliquity (%)	Highest Inlet Air Temperature (°C)	Main Motor (KW)	Weight (t)
Φ1.2×8.0	9.0	1.9 ~ 2.4	3 ~ 5	700 ~ 800	7.5	9
Φ1.2×10	11.3	2.4 ~ 3.0	3 ~ 5	700 ~ 800	7.5	11
Φ1.5×12	21.2	4.5 ~ 5.7	3 ~ 5	700 ~ 800	15	18.5
Φ1.5×14	24.7	5.3 ~ 6.6	3 ~ 5	700 ~ 800	15	19.7
Φ1.5×15	26.5	5.7 ~ 7.1	3 ~ 5	700 ~ 800	15	20.5
Φ1.8×12	30.5	6.5 ~ 8.1	3 ~ 5	700 ~ 800	18.5	21.5
Φ1.8×14	35.6	7.6 ~ 9.5	3 ~ 5	700 ~ 800	18.5	23
Φ2.2×12	45.6	9.7 ~ 12.2	3 ~ 5	700 ~ 800	22	33.5
Φ2.2×14	53.2	11.4 ~ 14.2	3 ~ 5	700 ~ 800	22	36
Φ2.2×16	60.8	13.0 ~ 16.2	3 ~ 5	700 ~ 800	22	38
Φ2.4×14	63.3	13.5 ~ 16.9	3 ~ 5	700 ~ 800	37	45
Φ2.4×18	81.4	17.4 ~ 21.7	3 ~ 5	700 ~ 800	37	49
Φ2.4×20	90.4	19.3 ~ 24.1	3 ~ 5	700 ~ 800	45	54
Φ2.4×22	99.5	21.2 ~ 26.5	3 ~ 5	700 ~ 800	45	58
Φ2.6×24	127.4	27.2 ~ 34.0	3 ~ 5	700 ~ 800	55	73
Φ3.0×20	141.3	30.1 ~ 37.7	3 ~ 5	700 ~ 800	75	85
Φ3.0×25	176.6	37.7 ~ 47.1	3 ~ 5	700 ~ 800	75	95
Φ3.2×25	201	42.9 ~ 53.6	3 ~ 5	700 ~ 800	90	110
Φ3.6×28	285	60.8 ~ 76.0	3 ~ 5	700 ~ 800	160	135

 

Note : this parameter just for reference , we also have other models machines , if you are interested in our equipments , please don't hesitate to contact me .

 

 

 

  

About us:

 

 We are specialized in designing and manufacturing poultry feed,aquatic feed pellet machinery,biomass pellet machinery and the complete production line(all auxiliary equipment) with CPM advanced technology.

 

The current products include: hammer mill, ingredient weighing system, mixer, pellet mill, counter-flow cooler, dryer, crumbler, rotary screener, liquid adding equipment, pulse filter equipment, horizontal and vertical conveying equipment, links and gates, permanent magnet cylinder, and de-iron equipment etc.

 

Welcome to China and Visit our company---------Henan Yuhong Heavy Machinery CO.,LTD.