Specifications

Yuhong jaw crusher:
1.high crushing ratio
2.reliable performance
3.simple structure
4.CE certificate,ISO 9001

• This series jaw crusher has properties of large crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, and low cost. So this kind of jaw crusher can be widely used in mining, metallurgy, building material, highway, railway, water project, chemical industry, etc, for crushing various materials with compression strength less than 320MPa.

   

•   

  Type	Feed-in size(mm)	Max feeding length(mm)	Feed-out size(mm)	Capacity(t/h)	Power(kw)	Weight(t)	Dimensions(L×W×H)(mm)
  PE-150×250	150×250	125	10-40	1-3	5.5	0.8	720×660×850
  PE-200×300	200×300	180	15-50	2-6	7.5	1.2	910×750×990
  PE-200×350	200×350	180	18-70	3-10	11	1.5	1000×870×990
  PE-250×400	250×400	210	20-60	5-20	15	2.8	1300×1090×1270
  PE-400×600	400×600	340	40-100	16-60	30	7	1730×1730×1630
  PE-500×750	500×750	425	50-100	40-110	55	12	1980×2080×1870
  PE-600×750	600×750	500	150-200	80-240	55	15.8	2070×2000×1920
  PE-600×900	600×900	500	65-160	50-180	55	17	2190×2206×2300
  PE-750×1060	750×1060	630	80-140	110-320	90-110	29	2660×2430×2800
  PE-800×1060	800×1060	640	160-220	130-330	110	29.8	2710×2430×2800
  PE-830×1060	830×1060	650	160-220	150-336	110	30.7	2740×2430×2800
  PE-870×1060	870×1060	660	200-260	190-336	110	31.5	2810×2430×2800
  PE-900×1060	900×1060	685	230-290	230-390	110	33	2870×2420×2940
  PE-900×1200	900×1200	750	95-165	220-450	110	52	3380×2870×3330
  PE-1000×1200	1000×1200	850	195-265	315-500	110	55	3480×2876×3330
  PE-1200×1500	1200×1500	1020	150-300	400-800	160	100.9	4200×3300×3500
  PEX-150×750	150×750	120	18-48	8-25	15	3.8	1200×1530×1060
  PEX-250×750	250×750	210	25-60	13-35	30	5.5	1380×1750×1540
  PEX-250×1000	250×1000	210	25-60	16-52	30	7	1560×1950×1390
  PEX-250×1200	250×1200	210	25-60	20-61	37	9.7	2140×1660×1500
  PEX-300×1300	300×1300	250	20-90	16-105	55	15.6	2720×1950×1600

  

• Features
• 1. The deep crushing cavity increases the feeding capacity and output capacity;
  2. High ratio of crushing, homogeneous final product size;
  3. Adjusting the discharge opening through gasket, more convenient, it can meet different customers’ requirements.
  4. Lubricate system is safe and reliable, easy to change the spare parts;
  5. Simple structure, easy maintenance, consumption cost is lower;
  6. Energy-saving, for one set saving about 15%-30%;
  7. Little noise and dust.
• Woking Principle
• The main working part of this is the rotor with a hammer (or hammer head), which consists of spindle, hammer and other parts. The motor drives the rotor spinning with high-speed in the cavity, and the materials needed to crush are conveyed into the cavity from the inlet, and being crushed by high-speed movement of the hammer blowing and impact, squeezing, and grinding among the materials. There is a screen plate at the bottom of the rotor, which can screen the crushed materials: materials size smaller than the sieve can come out through the sieve, while the materials with bigger size than the sieve will still be shot and grinded by the hammer, and finally be discharged out from the plate.