♣ feed crushing machine  Product feature:

• This series of products is novel, low noise, high efficiency crushing equipment ,which combines the designed advantage of the same type machine at home and abroad;

• It can be used with contraflow cooler straightly,installed in the bottom of the cooler,shorten the process flows and reduce covering area;

• It can suppress forming Φ3 to Φ6mm large particle breaking into irregular small particles of 1.5 to 2.5 mm;

• Compared with the direct suppression small diameter particles, it has advantages of high output, low energy consumption etc.

• It can be customized prawn particle breakage roll;

• This series of products has unique transmission and side stream device,it is convenient to use,change and broken;

• With advantage of reasonable compact structure, good crushing effect and low noise etc, it is the necessary crush equipment of feedstuff factory ,which production is 3000 to 60000 tons.

♣ feed crushing machine Machine parameter:

production line contains machine:

Hammer mill, mixer, pellet machine, cooler, screener and packing machine, etc.

Pellet feed of wide source of raw materials:

The poultry and livestock feed produce line is widely used to process feed with different materials such as corn, maize, grass, grains, molasses, and some other raw materials, is suitable for all kinds of the feed factories.

1.The crushing process:

Raw materials into the shredder is broken into customer requirements of size granular, crushed particles passing through the mesh into the crushing chamber and then is discharged from the discharge port. The user can accord to the needs of the particle size selection screen.

2. Mixing, pellet process:

The crushed particles in the mixer is fully stirred and uniformly mixed, enter into the ring die pellet machine to make them pellet.

3. Cooling, sieving process:

Granular semi-finished products in the SH series plane revolving grading sieve for grading and two circular grinding process and the number of particles, powder for cleaning and grading. Discharging port is the streamline shape design, not the material deposition, to avoid cross contamination.

4. Packaging process:

The packing process includes two parts: one is hosting part, the other one is packing part. The hosting machine will promote pellets from low to the top with its little hoppers, then drop the pellets into Packing Machine, with the automatic sealing system, the pellets can be packed into bags.

♣The feed production line we build: