Specifications

OR-021 Series Automatic Flexible Straw Making Machine
It is fully automatic from straight straws to product bending straws.

 

OR-021  Series automatic flexible straw making machine

  

DESCRIPTION:

This machine is a forming machine used to bending the straight drinking straw to be the flexible drinking straws. It is fully automatic from straight straws to product bending straws only need the worker to add the straight straw. 

The straight straws supplied in the hopper at the top of the machine, are feed one by one into the main drum of the machine and clamped by two mechanical hand. As the main drum rotates, the straw passes through two rotary dies to receive diepressed effect, is then compressed with two mechanical hand to from flexible. Then output the finished products automatically. The main drum always carries 12 straws in continuous operation. This machine has a higher production capacity.

 

CHARACTERISTICS
1. High production capacity.
2. With automatic product counting function.
3. Once the pre-set value is reached, the machine will make alarm sound.  

4. Automatic stop when fault.

 

Driving motor	7.5kw/frequency conversion
Production Capacity	Drinking straws:30,000-50,000pcs/h
Material	PP,PE
Straw specifications	diameter	Φ2—Φ13mm
	Length tolerance	0.1-1mm
Main Cylinder Screw Shaft	45/28,50/28
Vacuum Calibration and Cooling	Method of vacuum fixed diameter	Vacuum soaking
	Length of the cooling cistern	2.5m,3.5,4.5m/can be choose

 

FINISHED PRODUCT: