Specifications

Cages can move out easily
tipping easily by hand
hot dipped galvanized finish
side rails for tie down ropes
strong Jack

Production Description:  Caged box trailer in galvanzied  C74R13

 

Speficications:

 

Chassis: 2180x1280mm

Inner Box Size: 2100x1280mm

Frame: 70x50x2.75mm

Floor: rivetted  1.5mm ribbed pregalvanzied steel sheet

drawbar: 70x50x2.75mm

 

side panel: 300mm +  cagemoveable mesh cagesl

body Material: Steel Q235

wheel: 165/70R13  radius tire

mudguards: 1.5mm formed steel guards

Axle: 50x50x4mm  bearings :LM67048 & LM11949

suspension:  3 leaf spring  50x7mm 60Si2Mn

Finish: hot dipped galvanized, powder coated

 

Trailer assembly type: Bolt on

Part A  Lay the chassis upside down

step 1: springs mounted  into spring hangers with M14x85

step 2: axle overhang the springs and connected by U bolts and fish plate

step 3: Hub-wheel: take off lugnuts from hubs, wheel rim go through the hub bolt and ended by lugnuts.

step 4: Drawbar fitted to the chassis by bolts according to the manual

 

Part B

Step5: Takes the assembly upside with assistance

Step6: Bolt on the sides , mudguards, light holder and gates,coupler and safety chain according to the manual

Step 7: Put the lights into light holder, Lead the wiring to the trailer, connect the coupler according to the wiring diagram

Step 8: Check all the bolts and tighten fix special tools.

 

Part C: Take your trailer to the local traffic department for register with the Supplied VIN and cerificate of origin, please check the VIN (17 Nos and letters) starts from L4W. 

 

Thanks for your kind attention.