White Rice Whitener Emery Roller

Selection:

1. When the multi-light-milling is operated, select the big size (24#, 30# and 36#) for the 1st process, the middle size (36# and 46#) for the 2nd process, and the small size (46# and 60#) for the 3rd process;

2. When the higher accuracy of rice milling is required, select narrower or shallower spiral groove or straight, groove wheels;

3. When the high output of rice milling is required, select the thread, deeper or wider wheel;

4. When the high-water rice is processed, select the deeper and wider wheel.

Installation, Replacing & Maintenance:

1. Knock the wheel with a wooden hammer to check before your installation. It is forbidden to install if any clatter or hoarse is heard.;

2. Make the wheel race for five minutes before operating;

3. The linear velocity must be limited under 20m/s;

4. The wheel packed alone and used in group shoul be installed according to the order of the serial number;

5. When the output of rice milling is reduced, it will be restored by opening the rice milling room and poolishing the spiral groove;

6. When the accuracy is drawdown, open the rice milling room and poolish the surface to modify the concave surface with an angle grinder;

7. It should be moved lightly, avoiding collision, and put in the place of antifreeze and moisture-proof. Don’ put it with oil or acid-base.

The following types for your reference:

Welcome to contact with me anytime, my friend!!!